[ERROR] Could not change MAC: interface up or insufficient permissions: Operation not permitted
akashkushawah204 opened this issue · comments
[ERROR] Could not change MAC: interface up or insufficient permissions: Operation not permitted
use sudo macchanger [options] device
Not working! I have the same error. I use sudo and ifconfig wlan down, but the problem continue
Same. RockyOS 8.4, so basically CentOS 8. Kernel 4.18.0-305.19.1.el8_4.x86_64 .
[root@DHCP-40-118 ~]# ifconfig wlp0s21f0u2u2 down
[root@DHCP-40-118 ~]# macchanger -m 33:11:33:33:33:77 wlp0s21f0u2u2
Current MAC: 72:44:3f:31:0f:17 (unknown)
Permanent MAC: c8:3a:35:cb:6d:df (Tenda Technology Co., Ltd.)
[ERROR] Could not change MAC: interface up or insufficient permissions: Cannot assign requested address
[root@DHCP-40-118 ~]#
But, randomizing works:
[root@DHCP-40-118 ~]# macchanger -r wlp0s21f0u2u2
Current MAC: 72:44:3f:31:0f:17 (unknown)
Permanent MAC: c8:3a:35:cb:6d:df (Tenda Technology Co., Ltd.)
New MAC: 82:b5:78:df:e0:76 (unknown)
[root@DHCP-40-118 ~]#
Well, not really:
[root@DHCP-40-118 ~]# ifconfig wlp0s21f0u2u2 up
[root@DHCP-40-118 ~]# ifconfig wlp0s21f0u2u2
wlp0s21f0u2u2: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 56:8a:44:f5:4d:ee txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
So, I have three of the same Tenda USB Wifi adapters. Think that is hosing it, maybe? I do not see 82:b5:78:df:e0:76 on any of them.
This may be an issue with the RT driver:
[root@DHCP-40-118 ~]# ip link set dev wlp0s21f0u2u2 down
[root@DHCP-40-118 ~]# ip link set dev wlp0s21f0u2u2 address 33:11:33:33:77:33
RTNETLINK answers: Cannot assign requested address
[root@DHCP-40-118 ~]# ip link set dev wlp0s21f0u2u2 up
[root@DHCP-40-118 ~]#
These are:
Bus 001 Device 010: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 009: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 007: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Nope. This is "I/O Error" (Idiot Operator).
[root@DHCP-40-118 ~]# ifconfig wlp0s21f0u2u2 down
[root@DHCP-40-118 ~]# macchanger --mac=00:00:00:31:33:73 wlp0s21f0u2u2
Current MAC: fa:b1:c8:e2:59:39 (unknown)
Permanent MAC: c8:3a:35:cb:6d:df (Tenda Technology Co., Ltd.)
New MAC: 00:00:00:31:33:73 (XEROX CORPORATION)
[root@DHCP-40-118 ~]# ifconfig wlp0s21f0u2u2 up
Choose a different address w/o multicast bit set.
use: sudo macchanger -A eth0
use:
sudo macchanger -A eth0
wow, this is working :)
but i hava a question, why wlan0 is not working :(
use:
sudo macchanger -A eth0wow, this is working :) but i hava a question, why wlan0 is not working :(
u need to know the name of your driver, if its wlan0 or wlanmon then u should turn down, change the mac adress and then turn it up again.
I have the same problem. Again, macchanger works for the ethernet card, but not for the wifi card (giving the same error as for OP). Do the different capabilities of different drivers matter here? My wireless card is a Broadcom 4352 with a janky driver.
On a similar card, this works for me:
sudo ifconfig wlan0 down
sudo macchanger -br wlan0
sudo ifconfig wlan0 up
I have the same problem. Again, macchanger works for the ethernet card, but not for the wifi card (giving the same error as for OP). Do the different capabilities of different drivers matter here? My wireless card is a Broadcom 4352 with a janky driver.
If ur using Kali Linux or smtng similar but as a VM, probably you need to use an external wi-fi card, I had to buy one just tu use it for kali.
It's been a while but here is what I tried and worked;
ifconfig wlan0 down
macchanger --random wlan0
ifconfig wlan0 up
You must enter the codes in order
use:
sudo macchanger -A eth0
yes its absolutely working !!
$sudo macchanger -a device
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
For wlan0, you can try :
sudo systemctl stop NetworkManager
sudo macchanger -r wlan0
sudo systemctl start NetworkManager
Nope. This is "I/O Error" (Idiot Operator).
[root@DHCP-40-118 ~]# ifconfig wlp0s21f0u2u2 down [root@DHCP-40-118 ~]# macchanger --mac=00:00:00:31:33:73 wlp0s21f0u2u2 Current MAC: fa:b1:c8:e2:59:39 (unknown) Permanent MAC: c8:3a:35:cb:6d:df (Tenda Technology Co., Ltd.) New MAC: 00:00:00:31:33:73 (XEROX CORPORATION) [root@DHCP-40-118 ~]# ifconfig wlp0s21f0u2u2 up
Choose a different address w/o multicast bit set.
I had this too. The problem is it gave me permissions error (using sudo) when it was actually an error with my MAC entry. So misleading.
I also have the same problem: with the ethernet card the MAC changes easily but with the WI-FI card it gives this error: [ERROR] Could not change MAC: interface up or insufficient permissions: Operation not supported.
I tried to do as you said in the previous comments but I couldn't solve the problem. If anyone can give me a hand I would be happy
i have a brodcam 43142