cgminer-gc3355
CGMiner 3.72 with GridSeed GC3355 support
./configure --enable-scrypt --enable-gridseed
GC3355-specific options can be specified via --gridseed-options or "gridseed-options" in the configuration file as a comma-separated list of sub-options:
- baud - miner baud rate (default 115200)
- freq - a choice of 250/400/450/500/550/600/650/700/750/800/850/900/950/1000
- pll_r, pll_f, pll_od - fine-grained frequency tuning; see below
- chips - number of chips per device (default 5)
- per_chip_stats - print per-chip nonce generations and hardware failures
If pll_r/pll_f/pll_od are specified, freq is ignored, and calculated as follows:
- Fin = 25
- Fref = int(Fin / (pll_r + 1))
- Fvco = int(Fref * (pll_f + 1))
- Fout = int(Fvco / (1 << pll_od))
- freq = Fout
This version of cgminer turns off all BTC cores so that power usage is low. On a 5-chip USB miner, power usage is around 10 W. GPUs are also supported.