adafruit / Adafruit_CircuitPython_Motor

Helpers for controlling PWM based motors and servos

adafruit/Adafruit_CircuitPython_Motor Issues

l293
Closed 6 months ago1
Motor kit / motor issues
Closed 10 months ago4
`kit.continuous_servo[1].throttle = None` doesn't work like `kit.servo[1].angle = None`
Updated a year ago2
Servo motors are not disabling/releasing after setting angle to None
Updated a year ago8
Get Angle
Closed a year ago3
Does this library work with raspberry pi?
Closed a year ago3
Frequency of PCA9685 can't be set on a per channel basis
Closed a year ago2
Stepper motor assumes PWM pins are variable frequency
Closed a year ago
Documentation not building latest
Closed 2 years ago1
Add method to manually set pulse width
Closed 2 years ago4
ServoKit problem on Jetson Nano
Closed 2 years ago11
Missing Type Annotations
Closed 2 years ago1
Add support for digital pin control when not microstepping steppers.
Closed 2 years ago1
Add support for relative angle changes for servo?
Closed 3 years ago3
Recommend adding DCMotor controller decay mode getter/setter
Closed 3 years ago6
PWM output low average voltage problem with Servo motor
Closed 4 years ago1
Remove methods on DCMotor and ContinuousServo
Closed 4 years ago3
Example should be renamed to include simpletest
Closed 5 years ago2
Add servo examples not dependent on PCA9685
Closed 5 years ago3
provide a way to turn off a Servo
Closed 5 years ago9
provide a way to turn off stepper
Closed 5 years ago2
Minor: print statements in Example code fail on motor4.throttle
Closed 6 years ago3
Frequency of PCA9685 can't be set on a per channel basis
Closed 6 years ago
Naming and defaults for steppers could be changed
Closed 6 years ago2
Incorporate DC Motor Characteristics as Optional Parameters
Closed 6 years ago5
Add Micro Servo (#169) to servo_sweep.py example
Closed 6 years ago3