Root shell exploit for several Xiaomi routers: 4A Gigabit, 4A 100M, 4C, 3Gv2, 4Q, miWifi 3C...

How to run

NOTE: FROM VERSION 0.0.2 THE ROUTER NEEDS INTERNET ACCESS. If you require to run the exploit without internet access please try version 0.0.1. Find the versions here: https://github.com/acecilia/OpenWRTInvasion/releases

NOTE: THERE ARE REPORTED ISSUES WITH ROUTER IN AP MODE. If you're not able to succeed in the AP mode, try to switch to some other (WiFi Repeater or Gateway)

NOTE: THERE ARE COMPATIBILITY ISSUES REPORTED WHEN USING WINDOWS. This script only runs on Mac or Linux. If you run from Windows, please use docker (explained below)

Using Docker (also works on Windows)

docker build -t openwrtinvasion https://github.com/acecilia/OpenWRTInvasion.git
docker run --network host -it openwrtinvasion

Using the command line

pip3 install -r requirements.txt # Install requirements
python3 remote_command_execution_vulnerability.py # Run the script

You will be asked for the router IP address and for the stok. You can grab the stok from the router URL after you log in to the admin interface:

Note that the script must be run from the same IP address used when login into the router.

After that, a telnet server will be up and running. You can connect to it by running:

telnet <router_ip_address>

User: root
Password: root

The script also starts an ftp server at port 21, so you can get access to the filesystem using a GUI (for example cyberduck).

Supported routers and firmware versions

MiRouter 4A Gigabit:
- 2.28.62: user ksc91u claims that this method works
- 2.28.65: OpenWrt forum
- 2.28.132: OpenWrt forum
- 3.0.10: see here
- 3.0.24: OpenWrt forum
- 3.0.27: see here
- 3.2.30: see here
- 3.10.18: see here
MiRouter 4A 100M (non gigabit):
- 2.18.51: OpenWrt forum
- 2.18.58: OpenWrt forum
- 3.0.12: see here
- Find a troubleshooting guide here
MiRouter 4C:
- 2.14.81: OpenWrt forum
- 2.14.87: see here
- 2.14.92: see here
- Find here a troubleshooting guide for this router
Mi Router 3Gv2:
- 2.28.8: user Massimiliano Mangoni claims that this method works (message posted in Slack)
Mi Router 4Q (aka R4C):
- 2.28.48: user cadaverous claims that this method works (message posted in Slack), but because the router is mips architecture (not mipsel), he needed to use version 0.0.1 of the script (the other versions use a busybox binary built for the mipsel architecture that is used to start a telnet sever)
MiWifi 3C:
- 2.8.51_INT: OpenWrt forum, OpenWrt forum
- 2.9.217: OpenWrt forum, OpenWrt forum
- 2.14.45: OpenWrt forum, OpenWrt forum
Mi Router 4:
- 2.18.62: see here
- 2.26.175: see here
Xiaomi Mi R3P:
- Xiaomi Dev firmware: see here
Xiaomi 3Gv1:
- The stock firmware coming with the router: see here
AC2350 AIOT:
- 1.3.8CN: see here

Unsupported routers and firmware versions

MiRouter 4A Gigabit:
- 2.30.20: see details here
- 3.2.26: see details and alternatives here
Mi Extender AC1200 (RA75): see here

Xiaomi 4A Gigabit Global Edition

Find here a very complete introductory video to the router and the OpenWrt installation

Firmwares

This repository contains the following firmwares:

Official Xiaomi - 2.28.62 - in Chinese. SHA256: a3db7f937d279cf38c2a3bec09772d65
- URL in this repository: https://github.com/acecilia/OpenWRTInvasion/raw/master/firmwares/stock/miwifi_r4a_firmware_72d65_2.28.62.bin
Official Xiaomi - 3.0.24 - in English. MD5: 9c4a60addaad76dc13b6df6b4ac03233
- URL in this repository: https://github.com/acecilia/OpenWRTInvasion/raw/master/firmwares/stock/miwifi_r4a_all_03233_3.0.24_INT.bin
- URL in the official Xiaomi site: http://cdn.awsde0-fusion.fds.api.mi-img.com/xiaoqiang/rom/r4a/miwifi_r4a_all_03233_3.0.24_INT.bin

If you have a pending update in your Xiaomi stock firmware, you can check its md5 hash and the download url by navigating to:

http://192.168.31.1/cgi-bin/luci/;stok=<stok>/api/xqsystem/check_rom_update

Install OpenWrt

When installing OpenWrt on the Xiaomi 4A Gigabit, there are several options:

[PREFERRED OPTION]: use the latest supported stable release of OpenWrt. Find it in the official OpenWrt wiki page

Build your own image with imagebuilder, using the latest source code on master:

docker pull openwrtorg/imagebuilder:ramips-mt7621-master
docker run --rm -v "$(pwd)"/bin/:/home/build/openwrt/bin -it openwrtorg/imagebuilder:ramips-mt7621-master
make PROFILE=xiaomi_mir3g-v2 image

If after reading above text you still want to proceed, after login to the router through telnet run the following commands:

cd /tmp
curl https://raw.githubusercontent.com/acecilia/OpenWRTInvasion/master/firmwares/OpenWrt/06-06-2020/openwrt-ramips-mt7621-xiaomi_mir3g-v2-squashfs-sysupgrade.bin --output firmware.bin # Put here the URL you want to use to download the firmware
./busybox sha256sum firmware.bin # Verify the firmware checksum before flashing, very important to avoid bricking your device!
mtd -e OS1 -r write firmware.bin OS1 # Install OpenWrt

This will install the snapshot version of OpenWrt (without Luci). You can now use ssh to connect to the router (and install Luci if you prefer it).

Performance:

Please see here for a complete performance analysis

For more info and support go to:

OpenWrt forum thread

If you brick your device

You can find solutions in the following links:

User albertcp posted a very detailed guide: OpenWrt forum
User micky0867 has some more comments about the topic: OpenWrt forum
User hoddy created a video tutorial

Acknowledgments

Original vulnerabilities and exploit: UltramanGaia
Instructions to install OpenWrt after exploit execution: rogerpueyo
Testing and detailed install instructions: hey07
Checking the URL of pending updates: sicklesareterrible

acecilia / OpenWRTInvasion