HomeCenter2 - no values
michapr opened this issue · comments
Using HC2 4.083 beta
Have included device - without problems:
[15:05:44] Home Center ist im Lernmodus.
[15:05:48] Modul hinzugefügt
[15:05:48] Hinzufügen des Netzknoten Status Protokols abgeschlossen
[15:05:48] Hinzufügen des Modul abgeschlossen.
[15:05:52] ID 176: Set association for group 1
[15:05:52] ID 176: Received association report from group 1
[15:05:52] ID 176: Received association report from group 1
[15:05:53] ID 176: Set association for group 1
[15:05:53] ID 176: Received association report from group 1
[15:05:56] ID 176: Device configuration finished
[15:05:57] ID 176: Device configuration finished
Values will not be changed.
Sketch attached - same sketch is working with OZW (after reinclude - see #84)
If I will enable the Serial.print - COM port maybe lost. Or nothing willbe printed out.
Using OZW - values will be printed out. No idea how this is connected...
Is it 100% reproducible? We will try it on monday.
We need Z-Uno version too (does it happen on 2.0.3 too?)
Is working with HC2 4.090 and Beta release 2.0.3
Problem exist at stable release 2.0.2 only
So we can close it? Looks we fixed it too fast ;)
yes, for beta 2.0.3 can be closed - it is existing, while current stable release is out.