Anduril 2 today's release 2024-04-01 not working
dirtydancing opened this issue · comments
Real bug report here, given today's date of April 1st: I checked with Emisar D2 (0135) and Emisar D1K (0125), and I cannot get Anduril 2 release 2024-04-01 to work. Both lights, coming from the previous official Anduril 2 release 2023-12-03, start blinking right after reflashing, and also right after connecting the battery. No clicking input is possible, also no hard reset, nothing changes the lights' blinking.
Some more details: With the dual-channel Emisar D2, it appears that Channel 1 was blinking, whereas Channel 2 was constantly on, both very bright. With the single-channel Emisar D1K, when connecting the battery several times, it was sometimes bright blinking, sometimes bright constant-on, and also one time just dark (at that point, today's hilarious dark mode release notes actually seemed to be real).
Both lights could be reflashed back to the previous Anduril 2 release 2023-12-03, and worked fine again, just like before. I have used Hank's reflashing kit and ZFlasher AVR with an Android phone. The blinking of both lights started right after "successfully completed" was displayed. Just to make sure I have also tried with a new battery, and I have cleaned all the lights' contacts, but all of that did not make a difference.
The same here for Lume1 FW3X. Not working
I think I see what happened. On lights with "jump start", there was an infinite recursion error caused by Dark Mode. This release was, obviously, tested thoroughly. 😉
Fixed in 54119b9, and I updated the release .zip file too.