Concern - Plunger makes contact with housing
TheTrainGoes opened this issue · comments
TheTrain commented
Discord user states that the plunger makes contact with the body and creates a grinding sound (made in PA12)
TheTrain commented
This may be the result of stem wobble as I am not able to replicate it with Outemu Silent Peach switches on 30mm or 24mm buttons done in PA12.
It is possible that the buttons in question were not printed flat which may have caused grinding if the later lines were coming in contact with the plungers.
TheTrain commented
Have tested with about 40 buttons between resin and nylon and not been able to replicate.
Either bad batch or stem wobble issues.