vimade doesn't work with same buffer splits
zkwinkle opened this issue · comments
On Neovim startup, if I open a split the window quickly it will be unfaded, then fade after first check and unfade after the second check. The "checks" I'm talking about here are the ones whose interval is changed by the "checkinterval" setting. The following video is a demonstratino of what I'm describing:
output.mp4
This is a demonstration of how the plugin behaves when I set "checkinterval": 1000. If I set checkinterval to a shorter amount then the phenomenon happens faster and if I set it to a longer amount it takes longer, this is in part why I mentioned in the first paragraph that inactive splits fade after "the first check" and unfade "after the second". Just from timing it this seems to be the behaviour.
I've tried disabling some of my plugins and the cholorscheme line and so far I can't find any culprits for this weird behaviour. Any help would be kindly appreciated.
My current neovim config is the following (sorry for the spammy dump):
" Leader key
nnoremap <SPACE> <Nop>
let mapleader = " "
" Turn on syntax highlighting.
syntax on
" These lines make vim load various plugins
filetype on
filetype indent on
filetype plugin on
" Show line numbers.
set number
" Center cursor in the middle of the screen
set so=999
" Config line number color
highlight LineNr term=bold cterm=NONE ctermfg=Magenta ctermbg=NONE gui=NONE guifg=Magenta guibg=NONE
highlight CursorLineNr term=bold cterm=NONE ctermfg=DarkCyan ctermbg=NONE gui=NONE guifg=DarkCyan guibg=NONE
" This enables relative line numbering mode. With both number and relativenumber enabled, the current line shows the true line number
set relativenumber
" Always show the status line at the bottom, even if you only have one window open.
set laststatus=2
" This configuration makes backspace behave more reasonably, in that you can
" backspace over anything.
set backspace=indent,eol,start
" Allow hidden buffers
" hidden buffers helpful enough to disable this protection. See `:help hidden`
" for more information on this.
set hidden
" Make search case insensitive unless there's capital letters in the search
set ignorecase
set smartcase
" Enable searching as you type, rather than waiting till you press enter.
set incsearch
" Unbind some useless/annoying default key bindings.
nmap Q <Nop> " 'Q' in normal mode enters Ex mode. You almost never want this.
" Disable audible bell because it's annoying.
set noerrorbells visualbell t_vb=
" Enable mouse support. Try avoiding it as much as possible.
set mouse+=a
" This is to avoid using the arrow keys
" Do this in normal mode...
nnoremap <Left> :echoe "Use h"<CR>
nnoremap <Right> :echoe "Use l"<CR>
nnoremap <Up> :echoe "Use k"<CR>
nnoremap <Down> :echoe "Use j"<CR>
" ...and in insert mode
inoremap <Left> <ESC>:echoe "Use h"<CR>
inoremap <Right> <ESC>:echoe "Use l"<CR>
inoremap <Up> <ESC>:echoe "Use k"<CR>
inoremap <Down> <ESC>:echoe "Use j"<CR>
" Go to tab by number
" Go to tab by number
noremap <leader>1 1gt
noremap <leader>2 2gt
noremap <leader>3 3gt
noremap <leader>4 4gt
noremap <leader>5 5gt
noremap <leader>6 6gt
noremap <leader>7 7gt
noremap <leader>8 8gt
noremap <leader>9 9gt
noremap <leader>0 :tablast<cr>
" Shortcutting split navigation
noremap <C-h> <C-w>h
noremap <C-j> <C-w>j
noremap <C-k> <C-w>k
noremap <C-l> <C-w>l
" Shortcutting split movement
noremap <C-w>h <C-w><S-h>
noremap <C-w>j <C-w><S-j>
noremap <C-w>k <C-w><S-k>
noremap <C-w>l <C-w><S-l>
"""" FUZZY FILE FINDER CONFIG
" Search down into subfolders
" Add to vim path every file in this directory and subdirectories recursively
set path+=**
" Display all matching files when we tab complete
set wildmenu
"" TODO: configure wildmenu
" NOW WE CAN:
" - Hit tab to :find by partial match
" - Use * to make it fuzzy
" THINGS TO CONSIDER:
" - :b lets you autocomplete any open buffer
" TAG JUMPING:
" Create the `tags` file (may need to install ctags first)
command! MakeTags !ctags -R .
" NOW WE CAN:
" - Use ^] to jump to tag under cursor
" - Use g^] for ambiguous tags
" - Use ^t to jump back up the tag stack
" THINGS TO CONSIDER:
" - This doesn't help if you want a visual list of tags
" AUTOCOMPLETE:
" The good stuff is documented in |ins-completion|
" HIGHLIGHTS:
" - ^x^n for JUST this file
" - ^x^f for filenames (works with our path trick!)
" - ^x^] for tags only
" - ^n for anything specified by the 'complete' option
" NOW WE CAN:
" - Use ^n and ^p to go back and forth in the suggestion list
call plug#begin('~/.local/share/nvim/plugged')
"Plug 'fladson/vim-kitty', { 'branch': 'main'} " Syntax highlighting based on kitty terminal's config
" nvim tree related plugins
Plug 'kyazdani42/nvim-web-devicons' " for file icons
Plug 'kyazdani42/nvim-tree.lua'
" Language/format supports
Plug 'chrisbra/csv.vim' " csv data
Plug 'wlangstroth/vim-racket' " racket language support
"" Rust
" Pretty stuff :3
Plug 'luochen1990/rainbow' " rainbow parentheses
Plug 'psliwka/vim-smoothie' " smooth scrolls
Plug 'sprockmonty/wal.vim' " pywal colors in vim (branch that lets termguicolors be on)
Plug 'nvim-lualine/lualine.nvim' " Status line
Plug 'TaDaa/vimade' " fade inactive panes
call plug#end()
" Nvim-Tree config
nnoremap <C-f> :NvimTreeToggle<CR>
nnoremap <leader>f :NvimTreeFind<CR>
nnoremap <leader>r :NvimTreeRefresh<CR>
" Nvim-tree
let g:nvim_tree_side = 'left' "left by default
let g:nvim_tree_width = 24 "30 by default
let g:nvim_tree_indent_markers = 1 "0 by default, this option shows indent markers when folders are open
let g:nvim_tree_git_hl = 1 "0 by default, will enable file highlight for git attributes (can be used without the icons).
let g:nvim_tree_show_icons = {
\ 'git': 1,
\ 'folders': 1,
\ 'files': 1,
\ }
let g:nvim_tree_icons = {
\ 'default': '',
\ 'symlink': '',
\ 'git': {
\ 'unstaged': "✗",
\ 'staged': "✓",
\ 'unmerged': "",
\ 'renamed': "➜",
\ 'untracked': "★"
\ },
\ 'folder': {
\ 'default': "",
\ 'open': "",
\ 'empty': "",
\ 'empty_open': "",
\ 'symlink': "",
\ }
\ }
" lua Nvim-Tree options
lua << END
require'nvim-tree'.setup {
-- closes neovim automatically when the tree is the last **WINDOW** in the view
auto_close = true,
-- if true the tree will resize itself after opening a file
auto_resize = true,
filters = { -- Files to ignore
dotfiles = true,
custom = {
'.git',
'node_modules',
'.cache'
}
},
}
END
" rainbow parentheses
let g:rainbow_active = 1 "set to 0 if you want to enable it later via :RainbowToggle
" wal.vim
colorscheme wal
set termguicolors
" lualine status line
lua << END
require'lualine'.setup {
options = {theme = 'auto'}
}
END
" vimade (fade splits)
let g:vimade = { "checkinterval": 1000 }
" racket-vim
if has("autocmd")
au BufReadPost *.rkt,*.rktl set filetype=racket
au filetype racket set lisp
au filetype racket set autoindent
endif
Sorry for the confusion with the titles, I was being dumb and only trying out splitting the same buffer. Vimade works perfectly when opening splits to different buffers. Still though, I would like it if Vimade could fade the different splits that are pointing to the same buffer independently, instead of treating all of them as the same split, though I understand if this wouldn't be possible.
Thanks for the detailed report! The flicker during startup when opening a file should be resolved.
For windows vs buffers, Vimade currently supports buffers. There are trade-offs when supporting things at the window level (performance/accuracy and buffer only features (eg signs)) . Check out #17 and see if one of those methods meets your needs for window highlights (the second option is the better looking one, but you may need to tweak the timer values if the performance is not great).