The documenation for all hosts lives in here. The corresponding nixos configuration is in ./hosts.

New admins: getting started

Install nix (the recommended Multi-user installation is not NixOS, but only a package manager)
Enable flake support in nix. This effectively adds the following flags to all your nix <flags> develop-like commands: --extra-experimental-features nix-command --extra-experimental-features flakes
Clone the doctor-cluster-config repo, cd into it and run: nix develop. This opens a shell with additional packages available such as inv --list, sops and age.
To generate new admin key, run (requires age):

mkdir -p ~/.config/sops/age/
age-keygen -o ~/.config/sops/age/keys.txt

Provide the generated key to a pre-existing admin and wait for him to re-encrypt all secrets in this repo with it. After pulling the re-encrypted secrets you can read them with sops secrets.yml.

Apply config to all servers

Choose a deployment target:

$ inv -l
Available tasks:

  cleanup-gcroots
  deploy                   Deploy to servers
  deploy-host              Deploy to a single host, i.e. inv deploy-host --host 192.168.1.2
  deploy-local             Deploy NixOS configuration on the same machine. The NixOS configuration is
  format-disks             Format disks with zfs, i.e.: inv format-disks --hosts new-hostname --disk /dev/nvme0n1
  generate-root-password   Generate password hashes for users i.e. for root in ./hosts/$HOSTNAME.yml
  generate-ssh-cert        Generate ssh cert for host, i.e. inv generate-ssh-cert bill 131.159.102.1
  install-nixos            install nixos, i.e.: inv install-nixos --hosts new-hostname --flakeattr
  ipmi-powercycle
  ipmi-serial
  mount-disks              Mount disks from the installer, i.e.: inv mount-disks --hosts new-hostname --disk /dev/nvme0n1
  print-age-key            Print age key for sops, inv print-age-key --hosts "host1,host2"
  print-tinc-key
  reboot                   Reboot hosts. example usage: fab --hosts clara.r,donna.r reboot
  update-docs              Regenerate docs for all servers
  update-lldp-info         Regenerate lldp info for all servers
  update-sops-files        Update all sops yaml and json files according to .sops.yaml rules

Run!

$ inv deploy

Add new users

Add chair members to ./modules/users.nix and students to ./modules/students.nix.

For chair members use a uid in the 1000-2000. For new students use a uid in the 2000-3000 range. Check that the uid is unique across both files and in the range between to avoid conflicts.

If you need to give reviewers access i.e. for artifact evaluation, add them to ./modules/reviewer-accounts.nix. We use the uid range 4000-5000 there. By using users.users.<username>.allowedHosts it's possible to limit the hosts these users can access. To access the machine, they can use the ssh tunnel as described in here.

Add new servers

For installing new servers, see Add servers.

Update system

We use flakes to manage nixpkgs versions. To upgrade use:

$ nix flake update

Than commit flake.lock.

Home-manager

To install home-manager for a user simply run:

$ nix-shell '<home-manager>' -A install

This will initiate your home-manager and will generate a file similar to the one in home/.config/nixpkgs/home.nix

Visual Studio Code Server support in NixOS

You can use this to enable support for VS Code Server in NixOS.

An example of the home.nix configured for VS Code support is shown in home/.config/nixpkgs/home.nix.

IPMI

On our TUM rack machines we have IPMI support.

Generally, you can find the IPMI web interface at https://$HOST-mgmt.dse.in.tum.de/ (i.e. https://bill-mgmt.dse.in.tum.de) once the device has been installed in the rack. These addresses are only available through the management network, so you must use the RBG vpn for il1 to access them.

You can also retrieve the IP addresses assigned to the IPMI/BMC firmware by running:

ipmitool lan print

on the machine. On the other host (i.e. your laptop) you can run the following command to get a serial console:

$ ipmitool -I lanplus -H <ipmi-ip-address> -U ADMIN -P "$(sops -d --extract '["ipmi-passwords"]' secrets.yml)" sol activate

The following will reboot the machine:

$ ipmitool -I lanplus -H <ipmi-ip-address> -U ADMIN -P "$(sops -d --extract '["ipmi-passwords"]' secrets.yml)" power cycle

The IPMI password here is encrypted with sops. To decrypt it on your machine, your age/pgp fingerprint must be added to .sops.yaml in this repository. And one of the existing users must re-encrypt secrets.yml with your key.

Then press enter to get a login prompt. The root password for all machines is also stored in secrets.yaml.

Monitoring

Hosts are monitored here: https://grafana.thalheim.io/d/Y3JuredMz/monitoring?orgId=1

CI

All machines are build by gitlab ci on a self-hosted runner. Gitlab will also propagate the build status to the github repository eventually. The resulting builds are uploaded to https://tum-dse.cachix.org from where machines can download them while upgrading.

SuperSandro2000 / doctor-cluster-config