Giorgioggì's starred repositories
MechBoard64-keycaps
Keycaps for the MechBoard64 - off the shelf elements + some DIY
CBM-MX-Keyboards
Replacement and enhanced keyboards for Commodore machines
kicad-panelizer
A simple script to create a v-scored panel of a KiCad board.
c128-keyboard
Commodore 128 keyboard PCB for mechanical keyswitches
C128toSCART_THT
A project to connect a Commodoer C128 or another CGA Device to a SCART device
c64-pico-ram-interface
Let your Raspberry Pi Pico pretend to be a Commodore 64 ROM cartridge
Arduino-AY-3-8910-PSG-MusicPlayer
This sketch plays PSG files via a AY-3-8910 PSG chip which is a 3-voice programmable sound generator (PSG). Uses the Arduino Pro Mini microcontroller board and works on the ATmega328 or 168
FrequencyGenerator
Frequency Generator library for AVR and the ATMega32U4 (and similar) processor using Timer 4 and PLL clock. Sets the PLL, prescaler, and counter registers to calculated values from a long integer to produce a square wave output of the frequency specified. Produces a square wave signal from 1Hz to about 12MHz.
Teensy_3_5_VGM_Player_YM2612_SN76489
A hardware Sega Genesis / Master system video game music player based on the Teensy 3.5
ActionReplayAmiga
The reverse engineered schematics for the Action Replay II/III for the Amiga. The eventual end goal of this project is to reimplement the PALs in FPGA or with modern components.
1541-rebuild
Ersetzt den Analogteil einer Floppy 1541 oder 1541-II durch ein µC.
Prelude-ZII-Sound-Card
A replica of the Prelude ZII sound card for the Amiga.
pcb-covox-amp
A tiny sound card based on the Covox Speech Thing design which includes an LM386 amplifier.
ResponsiveAnalogRead
Arduino library for eliminating noise in analogRead inputs without decreasing responsiveness.
C64-CPM-Cartridge
A recreation of the CP/M cartridge for the Commodore 64.