Noob problems
maxence-de-saint-seine opened this issue · comments
Hello,
I did clone the project to my rpi and read your readme file. But now, I'm just blocked. I understood your code could help me for my project in node red. But i just don't know how to start the code know that I have the file on my pi.
Thanks for those who could help me or link me a tutorial, I searched for hours and didn't find anything.
Did you read it from here?
https://github.com/SpaceTeddy/CC1101/blob/master/README.md#raspberry-pi
Thank you for this quick answer. I did follow many tutorial and always got blocked by different issue. When i compile and start with those step, I just get
CC1100 SW: Verbose option is set `'
Raspberry CC1101 SPI Library test
Init CC1100...
no CC11xx found!
is that an hardware problem? wiring?
Fellow noob here, having the exact same issue.
Hoping for any kind of help!
OK, which Hardware do you use? rPi or arduino? please be so kind and take a picture of your full test setup. Probably we can find the issue.
Never mind, I thought I had double checked the wiring, but after a tripple check I noticed one cable was on the wrong pin.
But I'm gonna buy a new module, cause I believe this one may be busted.
I'm not getting anything on the RX.
Thanks anyway, and for the quick reply!
👍