hid-flash segmentation fault
pabolojo opened this issue · comments
I am trying to flash my STM32F103C8, I have already compiled my blink test sketch but when I try to flash the .bin I get a segmentation fault.
I execute it with this command:
./hid-flash ~/Desktop/test.bin ttyACM0
The output that I get is:
+-----------------------------------------------------------------------+
| HID-Flash v2.2.1 - STM32 HID Bootloader Flash Tool |
| (c) 2018 - Bruno Freitas http://www.brunofreitas.com |
| (c) 2018-2019 - Vassilis Serasidis https://www.serasidis.gr |
| Customized for STM32duino ecosystem https://www.stm32duino.com |
+-----------------------------------------------------------------------+
> Trying to open the [ttyACM0]...
error, counldn't open [/dev/ttyACM0]
> Unable to open the [ttyACM0]
> Searching for [1209:BEBA] device...
#
> [1209:BEBA] device is found !
> Sending <reset pages> command...
Segmentation fault
After that the STM32's led starts to blink quickly, and I have to restart the STM32 to keep executing the sketch that is flashed in it.
I am using a Raspberry Pi 4 as host system.
After installing the udev rule it seems to work well!
