Support for Logitech G Pro X 2
darkymtp opened this issue · comments
Description
Hello.
I can set sidetone, noise reduction and timeout via these command lines :
Side tone :
headsetcontrol --dev -- --device 0x046d:0x0af7 --usage 0xffa0,0x1 --send "0x51, 0x0a, 0x00, 0x03, 0x1b, 0x00, 0x05, 0x00, 0x07, 0x1b, 0x01, $1"
Mic noise reduction :
headsetcontrol --dev -- --device 0x046d:0x0af7 --usage 0xffa0,0x1 --send "0x51, 0x09, 0x00, 0x03, 0x1c, 0x00, 0x04, 0x00, 0x08, 0x1c, $1"
Time out :
headsetcontrol --dev -- --device 0x046d:0x0af7 --usage 0xffa0,0x1 --send "0x51, 0x09, 0x00, 0x03, 0x1c, 0x00, 0x04, 0x00, 0x06, 0x1d, $1"
I forked the project and wrote files to support side tone settings only, unsuccessfully.
https://github.com/darkymtp/HeadsetControl/
Help ! :-)
Headset Name
Logitech G Pro X 2
Device information
Detailed Device Information
Device Found
VendorID: 0x046d
ProductID: 0x0af7
path: /dev/hidraw4
serial_number: 0000000000000000
Manufacturer: Logitech
Product: PRO X 2 LIGHTSPEED
Interface: 3
Usage-Page: 0xc Usageid: 0x1
Device Found
VendorID: 0x046d
ProductID: 0x0af7
path: /dev/hidraw4
serial_number: 0000000000000000
Manufacturer: Logitech
Product: PRO X 2 LIGHTSPEED
Interface: 3
Usage-Page: 0xff13 Usageid: 0x1
Device Found
VendorID: 0x046d
ProductID: 0x0af7
path: /dev/hidraw4
serial_number: 0000000000000000
Manufacturer: Logitech
Product: PRO X 2 LIGHTSPEED
Interface: 3
Usage-Page: 0xffa0 Usageid: 0x1
Hello 👋
Thank you for reaching out and expressing interest in having support for a new headset.
We appreciate your willingness to contribute to the project!
In order to create a implementation for a specific headset, we need to be able to reverse-engineer and test the implementation on that particular device.
Explicitly speaking, only people who actually own the headset, can implement that request.
👉 If you're interested in adding support for a specific headset, we recommend taking a look at our wiki to get started.
📝 If you encounter any problems while using WireShark, we would be more than happy to help. Simply post screenshots and data on your progress.
Hello,
Hello. I can set sidetone, noise reduction and timeout via these command lines : Side tone :
headsetcontrol --dev -- --device 0x046d:0x0af7 --usage 0xffa0,0x1 --send "0x51, 0x0a, 0x00, 0x03, 0x1b, 0x00, 0x05, 0x00, 0x07, 0x1b, 0x01, $1"
If that works, your command here must be different. HIDPP_LONG_MESSAGE is just a value for 0x11, which is not strictly applicable to all (logitech) headsets.
So the code must simply look like this:
uint8_t sidetone_data[12] = { 0x51, 0x0a, 0x00, 0x03, 0x1b, 0x00, 0x05, 0x00, 0x07, 0x1b, 0x01, num};
also dont forget to set usage and usagepage in gpro_x2_init
It works, thanks !
Good to hear, dont forget to PR it! (Just click on Pull Requests, and create a new one from the branch where you pushed the changes)
I would like to add battery status before PR.
I have no clue on how to add battery status reporting, so here is my contribution.