Detecting only CPU Package temperature sensor, and not Cores Max
ficosime opened this issue · comments
Hello, just downloaded and started setting everything up.
However, I see YouTube videos I followed have a CPU "Core Max" sensor in the dropdown when creating a curve, but on my end (v186) I only see "Core" which is Package temperature, and CCD1.
The sensor should be there because in HWMonitor I can see Cores Max temperature and temperature of each core. Now I can also go with setting up a curve with Package, but the package is inconsistent, sometimes +10° from the actual Core Max temperature, sometimes even 18° difference.
PC Specs:
CPU: Ryzen 7 7800X3D (4.2-5.0 GHz)
CPU Cooler: Thermalright Frost Spirit 140
MBO: Asrock B650 PG Lighting, AM5
RAM: 2x Corsair Vengeance 16 GB (32GB) DDR5, 6000 MHz, CL30
GPU: RTX 4070 Ti Super ASUS TUF GAMING
CASE: Be Quite Shadow Base 800 FX, 4x140mm vent.
OS: Win 11 Pro
Thanks!
Closing, see : https://github.com/Rem0o/FanControl.Releases#issues-and-hardware-compatibility
General tip:
You can get good results with the Core (Tctl/tdie) . It'll be different that the core temp, but there's no absolute here. Either/or can be a good reference for cooling. Core temp isn't inherently better, you just need to adjust your curve based on that temp probe's effective range.