To build source currently only Linux has been tested, you can use WSL/2 if you are one Windows though.
sudo apt install gcc-arm-none-eabi
cd ./SPINNER
make
- Use the TeensyLoader to program the HEX file in
./Release
to your Teensy 4.0
-
python ./spinner.py COM4 info
-
python ./spinner.py /dev/ttyUSB0 dump ./flash.bin
-
python ./spinner.py COM4 vwrite ./flash.bin
Python 2.7 is no longer supported :-)
Python 3.8 was used/tested, but any python3 version should work
- Judges
- Zecoxao
- Support more flash chips
- Add test command to check signal integrity
- Cleaner data transfer methods
- Reliability (error handling)