p10 panel with ESP32 DEV

[thilankapun]

Hi
im trying this lib to work with ESP32, but nothing in the display , checked the clock signal but there is no clk signal output in pin 18 no response with LED panel.

[Ruslan Radchenko]

Have same problem. Did you solved it?

[thilankapun]

hi
no , it is not solved yet , some of led are blinking its a problem of library and tried to figured out but its not successful.

[Ruslan Radchenko]

i`m solved it. If you have telegram or somesthing else just write me, i show you my wiring and main problem (tg: @Atomic470)

[thilankapun]

great , can you share the details with email pls, i dont use telegram. [e-mail]

[MohammadMahdi Bayat]

Hello
I have a similar problem using the P10 module.
I sent you an email and hope to receive the answer as soon as you can.
thanks
[e-mail]

[Ruslan Radchenko]

Hello I have a similar problem using the P10 module. I sent you an email and hope to receive the answer as soon as you can. thanks [e-mail]

#25

[MohammadMahdi Bayat]

@RARadchenko
I'm not using Arduino or ESP module. I use STM32 processor like STM32F4
Any recommendation?

[Tanish Kunthe]

Use the ESP32 Board version 2.0.2.
It will work.