Erorr
elhawaryna opened this issue · comments
openSPA Enigma2 crash log
crashdate=jue jun 16 17:05:27 2022
compiledate=Jun 16 2022
skin=Default Skin
sourcedate=2022-06-16
branch=8.0
rev=b4c1064
component=Enigma2
stbmodel=ultimo
stbmodel=dm820
kernelcmdline=bmem=512M@512M memc1=768M console=ttyS0,1000000 root=/dev/mmcblk0p1 rootwait rootfstype=ext4
nimsockets=NIM Socket 0:
imageversion=box_type=dm820
imageissue=Welcome to openSPA for %h
dmesg
<6>[ 0.000000] Initializing cgroup subsys cpuset
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.4-4.0-dm820 (oe-user@oe-host) (gcc version 10.2.0 (GCC) ) #1 SMP Thu Jun 16 08:34:17 UTC 2022
<6>[ 0.000000] Fetching vars from bootloader... none present, using defaults.
<6>[ 0.000000] Options: moca=0 sata=1 pcie=1 usb=1
<6>[ 0.000000] Using 1024 MB + 1024 MB RAM (from CFE)
<6>[ 0.000000] bootconsole [early0] enabled
<6>[ 0.000000] CPU revision is: 00025b00 (Broadcom BMIPS5000)
<6>[ 0.000000] FPU revision is: 00130001
<6>[ 0.000000] Determined physical RAM map:
<6>[ 0.000000] memory: 10000000 @ 00000000 (usable)
<6>[ 0.000000] memory: 30000000 @ 20000000 (usable)
<6>[ 0.000000] memory: 30000000 @ 90000000 (usable)
<7>[ 0.000000] bmem: adding 247 MB LINUX region at 8 MB (0x0f750000@0x008b0000)
<6>[ 0.000000] bmem: adding 512 MB RESERVED region at 512 MB (0x20000000@0x20000000)
<7>[ 0.000000] bmem: adding 256 MB LINUX region at 1024 MB (0x10000000@0x40000000)
<6>[ 0.000000] Initrd not found or empty - disabling initrd
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] Normal 0x00000000 -> 0x00050000
<4>[ 0.000000] HighMem 0x00050000 -> 0x000c0000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] Early memory PFN ranges
<4>[ 0.000000] 0: 0x00000000 -> 0x00010000
<4>[ 0.000000] 0: 0x00020000 -> 0x00050000
<4>[ 0.000000] 0: 0x00090000 -> 0x000c0000
<7>[ 0.000000] On node 0 totalpages: 458752
<7>[ 0.000000] Normal zone: 2560 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 259584 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 3584 pages used for memmap
<7>[ 0.000000] HighMem zone: 193024 pages, LIFO batch:31
<6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @81e12000 s6784 r8192 d13696 u32768
<7>[ 0.000000] pcpu-alloc: s6784 r8192 d13696 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 452608
<5>[ 0.000000] Kernel command line: bmem=512M@512M memc1=768M console=ttyS0,1000000 root=/dev/mmcblk0p1 rootwait rootfstype=ext4
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>[ 0.000000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
<4>[ 0.000000] Primary data cache 32kB, 4-way, linesize 32 bytes.
<4>[ 0.000000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
<6>[ 0.000000] Memory: 1286500k/1048576k available (6887k kernel code, 548508k reserved, 1440k data, 260k init, 786432k highmem)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] Additional per-CPU info printed with stalls.
<6>[ 0.000000] NR_IRQS:160
<6>[ 0.000000] Measuring MIPS counter frequency...
<6>[ 0.000000] Detected MIPS clock frequency: 1407 MHz (175.887 MHz counter)
<6>[ 0.000000] Console: colour dummy device 80x25
<6>[ 0.000000] Calibrating delay loop... 935.93 BogoMIPS (lpj=467968)
<6>[ 0.010000] pid_max: default: 32768 minimum: 301
<6>[ 0.010000] Mount-cache hash table entries: 512
<6>[ 0.011000] Initializing cgroup subsys cpuacct
<6>[ 0.011000] Initializing cgroup subsys devices
<6>[ 0.012000] Initializing cgroup subsys freezer
<7>[ 0.012000] bcm40nm_pm_moca_disable 00
<6>[ 0.013000] SMP: Booting CPU1...
<4>[ 0.013000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
<4>[ 0.013000] Primary data cache 32kB, 4-way, linesize 32 bytes.
<4>[ 0.013000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
<6>[ 0.013000] CPU revision is: 00025b00 (Broadcom BMIPS5000)
<6>[ 0.013000] FPU revision is: 00130001
<6>[ 0.023000] SMP: CPU1 is running
<6>[ 0.023000] SMP: Booting CPU2...
<4>[ 0.023000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
<4>[ 0.023000] Primary data cache 32kB, 4-way, linesize 32 bytes.
<4>[ 0.023000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
<6>[ 0.023000] CPU revision is: 00025b00 (Broadcom BMIPS5000)
<6>[ 0.023000] FPU revision is: 00130001
<6>[ 0.032000] SMP: CPU2 is running
<6>[ 0.032000] SMP: Booting CPU3...
<4>[ 0.032000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
<4>[ 0.032000] Primary data cache 32kB, 4-way, linesize 32 bytes.
<4>[ 0.032000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
<6>[ 0.032000] CPU revision is: 00025b00 (Broadcom BMIPS5000)
<6>[ 0.032000] FPU revision is: 00130001
<6>[ 0.041000] SMP: CPU3 is running
<6>[ 0.041000] Brought up 4 CPUs
<6>[ 0.045000] devtmpfs: initialized
<6>[ 0.048000] bmem: adding extra 256 MB RESERVED region at 3072 MB (0x10000000@0xc0000000)
<6>[ 0.049000] NET: Registered protocol family 16
<6>[ 0.049000] USB0: power enable is active high; overcurrent is active low
<6>[ 0.050000] USB1: power enable is active high; overcurrent is active low
<7>[ 0.051000] __clk_disable: pcie [0]
<7>[ 0.051000] bcm7425_pm_pcie_disable 00
<6>[ 0.051000] PCI: PCIe link down
<6>[ 0.054000] bio: create slab at 0
<5>[ 0.055000] SCSI subsystem initialized
<7>[ 0.055000] libata version 3.00 loaded.
<6>[ 0.055000] usbcore: registered new interface driver usbfs
<6>[ 0.056000] usbcore: registered new interface driver hub
<6>[ 0.056000] usbcore: registered new device driver usb
<6>[ 0.057000] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[ 0.057000] PCI host bridge to bus 0000:00
<6>[ 0.058000] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
<6>[ 0.058000] pci_bus 0000:00: root bus resource [mem 0x00000400-0x000007ff]
<6>[ 0.059000] Bluetooth: Core ver 2.16
<6>[ 0.059000] NET: Registered protocol family 31
<6>[ 0.060000] Bluetooth: HCI device and connection manager initialized
<6>[ 0.060000] Bluetooth: HCI socket layer initialized
<6>[ 0.061000] Bluetooth: L2CAP socket layer initialized
<6>[ 0.061000] Bluetooth: SCO socket layer initialized
<6>[ 0.062000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.063000] Switching to clocksource wktmr
<5>[ 0.064000] FS-Cache: Loaded
<6>[ 0.069000] NET: Registered protocol family 2
<6>[ 0.077000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.078000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 0.081000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>[ 0.083000] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 0.084000] TCP: reno registered
<6>[ 0.085000] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.085000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.086000] NET: Registered protocol family 1
<6>[ 0.087000] RPC: Registered named UNIX socket transport module.
<6>[ 0.088000] RPC: Registered udp transport module.
<6>[ 0.088000] RPC: Registered tcp transport module.
<6>[ 0.089000] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 0.090000] PCI: CLS 0 bytes, default 128
<4>[ 0.091000] highmem bounce pool size: 64 pages
<5>[ 0.092000] NFS: Registering the id_resolver key type
<5>[ 0.093000] FS-Cache: Netfs 'nfs' registered for caching
<6>[ 0.094000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<5>[ 0.095000] FS-Cache: Netfs 'cifs' registered for caching
<6>[ 0.096000] NTFS driver 2.1.30 [Flags: R/O].
<6>[ 0.097000] fuse init (API version 7.18)
<6>[ 0.097000] SGI XFS with security attributes, large block/inode numbers, no debug enabled
<6>[ 0.099000] msgmni has been set to 976
<6>[ 0.100000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>[ 0.101000] io scheduler noop registered
<6>[ 0.102000] io scheduler cfq registered (default)
<6>[ 0.102000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.104000] serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 67) is a 16550A
<6>[ 0.104000] console [ttyS0] enabled, bootconsole disabled
<6>[ 0.106000] loop: module loaded
<7>[ 0.107000] __clk_enable: sata [1]
<7>[ 0.107000] bcm40nm_pm_sata_enable 00
<6>[ 0.107000] ahci: SSS flag set, parallel bus scan disabled
<6>[ 0.119000] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>[ 0.120000] ahci strict-ahci.0: flags: sntf stag clo slum part
<6>[ 0.124000] scsi0 : ahci_platform
<6>[ 0.125000] scsi1 : ahci_platform
<6>[ 0.126000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 46
<6>[ 0.126000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 46
<7>[ 0.128000] __clk_enable: network [1]
<7>[ 0.128000] bcm7425_pm_network_enable 00
<7>[ 0.128000] __clk_enable: enet [1]
<7>[ 0.128000] bcm40nm_pm_genet_enable 00
<2>[ 0.419000] Found PHY at Address 3
<6>[ 0.419000] bcmgenet: configuring instance #0 for external RGMII
<7>[ 0.420000] __clk_disable: enet [0]
<7>[ 0.420000] bcm40nm_pm_genet_disable 00
<7>[ 0.420000] __clk_disable: network [0]
<7>[ 0.420000] bcm7425_pm_network_disable 00
<6>[ 0.420000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[ 0.421000] __clk_enable: usb [1]
<7>[ 0.421000] bcm40nm_pm_usb_enable 00
<6>[ 0.421000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
<6>[ 0.421000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
<6>[ 0.433000] ata1: SATA link down (SStatus 0 SControl 300)
<6>[ 0.454000] ehci-brcm ehci-brcm.0: irq 71, io mem 0x10480300
<6>[ 0.460000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
<6>[ 0.461000] hub 1-0:1.0: USB hub found
<6>[ 0.461000] hub 1-0:1.0: 1 port detected
<6>[ 0.462000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
<6>[ 0.462000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
<6>[ 0.494000] ehci-brcm ehci-brcm.1: irq 72, io mem 0x10480500
<6>[ 0.500000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
<6>[ 0.500000] hub 2-0:1.0: USB hub found
<6>[ 0.501000] hub 2-0:1.0: 1 port detected
<6>[ 0.502000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
<6>[ 0.502000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
<6>[ 0.534000] ehci-brcm ehci-brcm.2: irq 76, io mem 0x10490300
<6>[ 0.540000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
<6>[ 0.540000] hub 3-0:1.0: USB hub found
<6>[ 0.541000] hub 3-0:1.0: 1 port detected
<6>[ 0.542000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
<6>[ 0.542000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
<6>[ 0.574000] ehci-brcm ehci-brcm.3: irq 77, io mem 0x10490500
<6>[ 0.580000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
<6>[ 0.580000] hub 4-0:1.0: USB hub found
<6>[ 0.581000] hub 4-0:1.0: 1 port detected
<6>[ 0.582000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 0.582000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
<6>[ 0.583000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
<6>[ 0.584000] ohci-brcm ohci-brcm.0: irq 73, io mem 0x10480400
<6>[ 0.650000] hub 5-0:1.0: USB hub found
<6>[ 0.650000] hub 5-0:1.0: 1 port detected
<6>[ 0.651000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
<6>[ 0.652000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
<6>[ 0.653000] ohci-brcm ohci-brcm.1: irq 74, io mem 0x10480600
<6>[ 0.718000] hub 6-0:1.0: USB hub found
<6>[ 0.718000] hub 6-0:1.0: 1 port detected
<6>[ 0.719000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
<6>[ 0.720000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
<6>[ 0.720000] ohci-brcm ohci-brcm.2: irq 78, io mem 0x10490400
<6>[ 0.738000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[ 0.786000] hub 7-0:1.0: USB hub found
<6>[ 0.786000] hub 7-0:1.0: 1 port detected
<6>[ 0.787000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
<6>[ 0.788000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
<6>[ 0.789000] ohci-brcm ohci-brcm.3: irq 79, io mem 0x10490600
<6>[ 0.854000] hub 8-0:1.0: USB hub found
<6>[ 0.854000] hub 8-0:1.0: 1 port detected
<6>[ 0.855000] Initializing USB Mass Storage driver...
<6>[ 0.856000] usbcore: registered new interface driver usb-storage
<6>[ 0.856000] USB Mass Storage support registered.
<6>[ 0.857000] i2c /dev entries driver
<6>[ 0.857000] lirc_dev: IR Remote Control driver registered, major 253
<6>[ 0.858000] usbcore: registered new interface driver btusb
<6>[ 0.859000] sdhci: Secure Digital Host Controller Interface driver
<6>[ 0.860000] sdhci: Copyright(c) Pierre Ossman
<6>[ 0.860000] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 0.861000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
<7>[ 0.864000] Registered led device: mmc0::
<6>[ 0.867000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
<6>[ 0.867000] sdhci-brcmstb sdhci-brcmstb.1: Enabling controller
<7>[ 0.870000] Registered led device: mmc1::
<6>[ 0.873000] mmc1: SDHCI controller on sdhci-brcmstb.1 [sdhci-brcmstb.1] using ADMA
<6>[ 0.874000] TCP: cubic registered
<6>[ 0.874000] NET: Registered protocol family 10
<6>[ 0.876000] NET: Registered protocol family 17
<6>[ 0.876000] Bluetooth: RFCOMM TTY layer initialized
<6>[ 0.877000] Bluetooth: RFCOMM socket layer initialized
<6>[ 0.877000] Bluetooth: RFCOMM ver 1.11
<6>[ 0.878000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 0.878000] Bluetooth: BNEP filters: protocol multicast
<6>[ 0.879000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 0.880000] L2TP core driver, V2.0
<5>[ 0.880000] Registering the dns_resolver key type
<6>[ 0.881000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
<6>[ 0.882000] EBI CS0: setting up SPI flash (primary)
<6>[ 0.883000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
<6>[ 0.883000] spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated
<6>[ 0.884000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
<5>[ 0.886000] Creating 3 MTD partitions on "spi0.0":
<5>[ 0.886000] 0x000000000000-0x000001000000 : "entire_device"
<5>[ 0.887000] 0x000000000000-0x000000100000 : "bootloader"
<5>[ 0.888000] 0x000000100000-0x000001000000 : "recovery"
<6>[ 0.889000] ALSA device list:
<6>[ 0.890000] No soundcards found.
<6>[ 0.890000] Waiting for root device /dev/mmcblk0p1...
<6>[ 0.975000] mmc0: new high speed MMC card at address 0001
<6>[ 0.976000] mmcblk0: mmc0:0001 SEM04G 3.68 GiB
<6>[ 0.977000] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB
<6>[ 0.977000] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB
<6>[ 0.983000] mmcblk0: p1 p2
<6>[ 0.984000] mmcblk0boot1: unknown partition table
<6>[ 0.986000] mmcblk0boot0: unknown partition table
<6>[ 1.138000] ata2.00: ATA-8: TOSHIBA MK3252GSX, LV010A, max UDMA/100
<6>[ 1.138000] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
<6>[ 1.140000] ata2.00: configured for UDMA/100
<5>[ 1.141000] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
<5>[ 1.142000] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
<5>[ 1.143000] sd 1:0:0:0: [sda] Write Protect is off
<7>[ 1.144000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 1.144000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 1.180000] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 1.183000] VFS: Mounted root (ext4 filesystem) on device 179:1.
<6>[ 1.193000] devtmpfs: mounted
<6>[ 1.198000] sda: sda1
<5>[ 1.199000] sd 1:0:0:0: [sda] Attached SCSI disk
<4>[ 2.072000] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
<6>[ 2.074000] EXT4-fs (sda1): recovery complete
<6>[ 2.075000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<4>[ 2.495000] stb_core: module license 'Proprietary' taints kernel.
<4>[ 2.496000] Disabling lock debugging due to kernel taint
<6>[ 3.033000] bcm7435: xvd 20130918, vdc 20130918, rap 20130918, xpt 20130918, driver version 20181018-dm820
<3>[ 3.500000] 3:500674516 SMCA: controller reset timed out
<3>[ 3.513000] 3:513875466 SMCB: controller reset timed out
<4>[ 3.924000] register adapter
<4>[ 3.925000] register adapter
<4>[ 3.928000] register adapter
<4>[ 3.929000] register adapter
<4>[ 3.932000] register adapter
<4>[ 3.935000] swd: status is 0, pls check
<4>[ 3.935000] swd: cannot init port
<4>[ 3.935000] ble module not found
<4>[ 3.937000] FP detected
<4>[ 3.937000] FP Version 3
<6>[ 3.939000] input: dreambox front panel as /devices/virtual/input/input0
<4>[ 3.952000] keys 84
<6>[ 3.956000] ina2xx 5-0040: power monitor ina219 (Rshunt = 10000 uOhm)
<4>[ 3.962000] HDMI: CEC start ... state is now 1
<4>[ 3.963000] set input to 0
<4>[ 3.963000] set fb to 2(-1)
<4>[ 3.969000] fallback to startvideomode '720p50'
<6>[ 3.970000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
<4>[ 4.037000] HDMI: CEC use logical address 3
<4>[ 4.037000] HDMI: CEC init completed... state is now 3!
<4>[ 4.038000] HDMI: now connected
<4>[ 4.066000] HDMI: CEC Physical Addr 3.0.0.0 set from EDID
<4>[ 4.066000] HDMI: EDID read ok
<4>[ 4.067000] HDMI: initial mode set!
<4>[ 4.067000] using 50.00Hz as MonitorRefreshRate
<4>[ 4.067000] SET FORMAT: display[0], format='720p50'
<4>[ 4.068000] HDMI mode
<4>[ 4.068000] use EDID to detect colorspace
<4>[ 4.069000] preferred colorspace: Itu_R_BT_709
<4>[ 4.186000] HDMI: CEC send ok!
<4>[ 4.325000] VIDEO0: enable deinterlacer
<4>[ 4.326000] VIDEO0: set fallback framerate to 60000
<4>[ 4.326000] VIDEO0: set progressive override mode to 1
<4>[ 4.327000] VIDEO0: set streamtype!
<4>[ 4.327000] -> set MPEG2
<4>[ 4.328000] -> sw rave disabled!
<4>[ 4.355000] VIDEO1: set fallback framerate to 60000
<4>[ 4.356000] VIDEO1: set progressive override mode to 1
<4>[ 4.357000] VIDEO1: set streamtype!
<4>[ 4.357000] -> set MPEG2
<4>[ 4.357000] -> sw rave disabled!
<4>[ 4.431000] VIDEO2: set fallback framerate to 60000
<4>[ 4.431000] VIDEO2: set progressive override mode to 1
<4>[ 4.432000] VIDEO2: set streamtype!
<4>[ 4.432000] -> set MPEG2
<4>[ 4.433000] -> sw rave disabled!
<4>[ 4.446000] set ac3 to downmix
<4>[ 4.446000] set wmapro to downmix
<4>[ 4.447000] set ac3plus to use_hdmi_caps
<4>[ 4.447000] set dtshd to force_dts
<4>[ 4.447000] set aac to downmix
<4>[ 4.448000] audio ch2: add stereo (background decoder) input to mixer DUMMY2
<4>[ 4.449000] audio ch1: add stereo (hdmi-rx) input to mixer DUMMY
<6>[ 4.450000] DVB: registering new adapter (BCM7435)
<4>[ 4.495000] autodetecting NIMs...
<4>[ 5.006000] Found: Slot 0, ID: 13 (by CA)
<4>[ 5.006000] Initializing adapter 0 (BCM4505-DVB-S2)
<6>[ 5.059000] bcm4506: found 4505, revision 0(b0)
<6>[ 5.059000] bcm4506: bcm_initAP
<4>[ 5.060000] DVB: registering adapter 0 frontend 0 (bcm4506)...
<6>[ 5.061000] bcm4506: bcm4506: ap not running - start now
<4>[ 5.062000] init ALSA!
<4>[ 5.065000] registered vtuner misc/vtuner0, minor 50
<4>[ 5.067000] registered vtuner misc/vtuner1, minor 49
<4>[ 5.068000] registered vtuner misc/vtuner2, minor 48
<4>[ 5.069000] registered vtuner misc/vtuner3, minor 47
<4>[ 5.072000] registered vtuner misc/vtuner4, minor 46
<4>[ 5.073000] registered vtuner misc/vtuner5, minor 45
<4>[ 5.074000] HDMI-RX: init
<4>[ 5.075000] HDMI-RX: no device attached
<4>[ 5.076000] HDMI-RX: video format change event
<4>[ 5.076000] HDMI-RX: hdmi packet status stopped
<4>[ 5.077000] HDMI-RX: hdmiInput0 Receiving DVI format RGB (Default)
<4>[ 5.078000] HDMI-RX: hdmiInput0 Color Space change from 'RGB (Default)' to 'RGB (Default)'
<4>[ 5.079000] HDMI-RX: init done
<4>[ 5.079000] bcm_vce_init()
<4>[ 5.079000] bcm_vce_init() 0
<4>[ 5.110000] vice0: allocate output buffers
<6>[ 5.124000] bcm4506: uCode 0x61
<6>[ 5.134000] input: dreambox remote control (native) as /devices/virtual/input/input1
<6>[ 5.138000] input: dreambox advanced remote control (native) as /devices/virtual/input/input2
<6>[ 5.142000] input: dreambox ir keyboard as /devices/virtual/input/input3
<6>[ 5.144000] input: dreambox ir mouse as /devices/virtual/input/input4
<6>[ 5.145000] bcm4506: no bcm3445 detected
<4>[ 5.163000] ble init (0)
<6>[ 5.164000] input: dreambox remote control (bluetooth le) as /devices/virtual/input/input5
<6>[ 5.206000] model=dm820
<6>[ 5.207000] machinebuild=dm820
<6>[ 5.207000] displaymodel=DM820
<6>[ 5.207000] brand=dreambox
<6>[ 5.208000] displaybrand=Dreambox
<6>[ 5.208000] friendlyfamily=dm820
<6>[ 5.208000] platform=dm820
<6>[ 5.209000] imgversion=8.0
<6>[ 5.209000] imgrevision=001
<6>[ 5.209000] imglanguage=multilang
<6>[ 5.210000] developername=openspa
<6>[ 5.210000] feedsurl=https://openspa.webhop.info/feeds/oea/8.0/dm820
<6>[ 5.211000] distro=openspa
<6>[ 5.211000] displaydistro=openSPA
<6>[ 5.212000] oe=OE-Alliance 5.0
<6>[ 5.212000] kernel=3.4-4.0-dm820
<6>[ 5.212000] python=3.9
<6>[ 5.213000] mediaservice=servicegstreamer
<6>[ 5.213000] multilib=False
<6>[ 5.214000] architecture=mips32el
<6>[ 5.214000] socfamily=bcm7435
<6>[ 5.214000] blindscanbinary=blindscan
<6>[ 5.215000] rctype=0
<6>[ 5.215000] rcname=dmm2
<6>[ 5.215000] rcidnum=2
<6>[ 5.216000] smallflash=False
<6>[ 5.216000] middleflash=False
<6>[ 5.216000] imagedir=dm820
<6>[ 5.217000] imagefs=tar.bz2
<6>[ 5.217000] mtdbootfs=
<6>[ 5.217000] mtdrootfs=mmcblk0p1
<6>[ 5.218000] mtdkernel=mmcblk0p1
<6>[ 5.218000] rootfile=rootfs.tar.bz2
<6>[ 5.218000] kernelfile=kernel.bin
<6>[ 5.219000] mkubifs=
<6>[ 5.219000] ubinize=
<6>[ 5.219000] forcemode=no
<6>[ 5.220000] compiledate=20220616
<6>[ 5.220000] fpu=
<6>[ 5.220000] displaytype=bwlcd96colorlcd
<6>[ 5.221000] transcoding=False
<6>[ 5.221000] multitranscoding=False
<6>[ 5.222000] hdmi=True
<6>[ 5.222000] yuv=False
<6>[ 5.222000] rca=False
<6>[ 5.222000] avjack=False
<6>[ 5.223000] scart=False
<6>[ 5.223000] dvi=False
<6>[ 5.223000] svideo=False
<6>[ 5.224000] hdmihdin=False
<6>[ 5.224000] hdmifhdin=True
<6>[ 5.224000] wol=False
<6>[ 5.224000] wwol=False
<6>[ 5.225000] ci=True
<6>[ 5.225000] vfdsymbol=False
<6>[ 5.225000] fhdskin=False
<6>[ 5.226000] dboxlcd=False
<6>[ 5.226000] imageversion=8.0
<6>[ 5.226000] imagebuild=001
<6>[ 5.227000] imagedevbuild=001
<6>[ 5.227000] imagetype=release
<6>[ 5.227000] driversdate=20181018
<4>[ 5.231000] 0 ms:
<6>[ 6.054000] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered
<4>[ 6.060000] 829 ms: 9
<4>[ 6.275000] 215 ms: 11
<4>[ 6.310000] 35 ms: 12
<4>[ 6.314000] VIDEO0: set blank to 0
<4>[ 6.315000] sync0 is off so we enable it
<4>[ 6.316000] sync0: allocated pcroffset 0
<4>[ 6.316000] sync0: playback!
<4>[ 6.316000] VIDEO0: total delay: 0 (0 ms)
<4>[ 6.322000] VIDEO0: start decode
<4>[ 6.322000] VIDEO0: flush video decoder
<4>[ 6.323000] VIDEO0 got pts failed !!!! (ret 0)
<4>[ 6.331000] 21 ms: 13
<4>[ 6.356000] 24 ms: 15
<4>[ 6.385000] VIDEO0: first pts 0x0
<4>[ 6.385000] VIDEO0: framerate changed 3
<4>[ 6.386000] VIDEO0: resolution changed (1280 720)
<4>[ 6.386000] VIDEO0: aspect changed 3
<4>[ 6.387000] set current avs auto aspect to 16:9
<4>[ 6.388000] set current avs auto aspect to 16:9
<4>[ 6.388000] set sb to 3(1)
<4>[ 6.538000] VIDEO0: enable tsm
<4>[ 6.599000] VIDEO0: stop decode
<4>[ 6.600000] sync0 1fff no decoder left in sync handling so disable
<4>[ 6.601000] sync0: was last pcroffset0 user so free it
<4>[ 6.798000] 442 ms: 16
<4>[ 6.823000] 25 ms: 17
<4>[ 7.365000] 541 ms: 19
<4>[ 7.397000] 32 ms: 20
<4>[ 7.438000] 40 ms: 22
<4>[ 7.469000] 30 ms: 23
<4>[ 7.527000] 57 ms: 24
<4>[ 8.770000] 1242 ms: 26
<4>[ 8.802000] 31 ms: 27
<4>[ 8.830000] 27 ms: 28
<4>[ 8.857000] 27 ms: 30
<4>[ 9.338000] 481 ms: 31
<4>[ 9.461000] 123 ms: 33
<4>[ 35.593000] 26132 ms: 33
<7>[ 35.794000] __clk_enable: network [1]
<7>[ 35.794000] bcm7425_pm_network_enable 00
<7>[ 35.794000] __clk_enable: enet [1]
<7>[ 35.794000] bcm40nm_pm_genet_enable 00
<6>[ 35.796000] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[ 35.896000] bcmgenet bcmgenet.0: eth0: link up, 1000 Mbps, full duplex
<6>[ 35.897000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[ 39.059000] rtc set to 1655382723
<4>[ 39.060000] rtc set to valid now
<4>[ 39.146000] 3553 ms: 34
<4>[ 39.207000] 60 ms: 35
<4>[ 39.232000] 25 ms: 35
<4>[ 39.294000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
<6>[ 39.296000] NFSD: starting 90-second grace period
<4>[ 39.351000] 118 ms: 36
<4>[ 39.379000] 28 ms: 37
<4>[ 40.464000] 1085 ms: 37
<4>[ 40.527000] 63 ms: 38
<4>[ 40.559000] 32 ms: 39
<4>[ 40.586000] 27 ms: 39
<4>[ 40.624000] 38 ms: 40
<4>[ 42.268000] 1644 ms: 41
<4>[ 42.364000] 96 ms: 41
<4>[ 42.472000] 107 ms: 42
<4>[ 42.517000] 45 ms: 43
<4>[ 42.556000] 39 ms: 44
<4>[ 42.617000] 61 ms: 44
<4>[ 42.643000] 26 ms: 45
<4>[ 42.673000] 29 ms: 46
<4>[ 42.690000] 17 ms: 46
<4>[ 42.733000] 43 ms: 47
<4>[ 42.767000] 34 ms: 48
<4>[ 42.771000] 4 ms: 48
<4>[ 43.838000] sync0 is off so we enable it
<4>[ 43.838000] sync0: allocated pcroffset 0
<4>[ 43.839000] sync0: playback!
<4>[ 43.839000] VIDEO0: total delay: 0 (0 ms)
<4>[ 43.845000] VIDEO0: start decode
<4>[ 43.845000] VIDEO0: flush video decoder
<4>[ 43.905000] VIDEO0: first pts 0x0
<4>[ 44.056000] VIDEO0: enable tsm
<4>[ 44.121000] VIDEO0: stop decode
<4>[ 44.122000] sync0 1fff no decoder left in sync handling so disable
<4>[ 44.123000] sync0: was last pcroffset0 user so free it
<7>[ 46.290000] eth0: no IPv6 routers present
<3>[ 46.524000] bcm_accel: invalid opcode! 00000080
<6>[ 46.547000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
<4>[ 46.690000] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
<4>[ 46.691000] HDMI: CEC returned state 3
<4>[ 46.692000] HDMI: CEC state now 803
<6>[ 46.714000] bcm4506: channel 0 is in normal mode now
<6>[ 46.726000] bcm4506: channel 0 is sleeping now
<4>[ 46.737000] set current avs auto aspect to 16:9
<4>[ 46.738000] set sb to 3(1)
<4>[ 46.739000] set current avs auto aspect to 16:9
<4>[ 46.739000] set sb to 3(1)
<4>[ 46.740000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 46.741000] set current avs auto aspect to 16:9
<4>[ 46.742000] set sb to 3(1)
<4>[ 46.742000] set current avs auto aspect to 16:9
<4>[ 46.743000] set sb to 3(1)
<4>[ 46.743000] VIDEO1: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 46.820000] HDMI: CEC send ok!
<4>[ 54.682000] set current avs auto aspect to 16:9
<4>[ 54.682000] set sb to 3(1)
<4>[ 54.705000] set current avs auto aspect to 16:9
<4>[ 54.705000] set sb to 3(1)
<4>[ 54.725000] set current avs auto aspect to 16:9
<4>[ 54.726000] set sb to 3(1)
<4>[ 54.727000] set input to 0
<4>[ 54.728000] set fb to 2(-1)
<4>[ 54.728000] set current avs auto aspect to 16:9
<4>[ 54.729000] set sb to 3(1)
<4>[ 54.745000] set mute 0 1
<4>[ 54.747000] set ac3 to downmix
<4>[ 54.749000] set ac3plus to force_ac3
<4>[ 54.751000] set dtshd to use_hdmi_caps
<4>[ 54.753000] set wmapro to downmix
<4>[ 54.755000] set aac to downmix
<4>[ 54.761000] set current avs auto aspect to 16:9
<4>[ 54.762000] set sb to 3(1)
<4>[ 54.762000] set current avs auto aspect to 16:9
<4>[ 54.763000] set sb to 3(1)
<4>[ 55.974000] set current avs auto aspect to 16:9
<4>[ 55.974000] set sb to 3(1)
<4>[ 55.976000] set current avs auto aspect to 16:9
<4>[ 55.976000] set sb to 3(1)
<4>[ 55.978000] set current avs auto aspect to 16:9
<4>[ 55.978000] set sb to 3(1)
<4>[ 55.980000] set current avs auto aspect to 16:9
<4>[ 55.981000] set sb to 3(1)
<4>[ 62.465000] using 50.00Hz as MonitorRefreshRate
<4>[ 62.466000] VIDEO1: shared window not available
<4>[ 62.545000] SET FORMAT: display[0], format='720p50'
<4>[ 62.546000] HDMI mode
<4>[ 62.546000] use EDID to detect colorspace
<4>[ 62.546000] preferred colorspace: Itu_R_BT_709
<4>[ 62.645000] VIDEO1: shared window not available
<4>[ 62.725000] set current avs auto aspect to 16:9
<4>[ 62.726000] set sb to 3(1)
<4>[ 63.405000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 63.406000] set current avs auto aspect to 16:9
<4>[ 63.407000] set sb to 3(1)
<4>[ 63.407000] VIDEO1: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!