Install Error on Fedora 39
EricAiken opened this issue · comments
The problem
pip failure to install. Seems similar to #4854
running latest python version 3.12.1
running latest pyyaml version 6.0.1-11
Collecting PyYAML<6,>=5.4.1 (from octoprint)
Downloading PyYAML-5.4.1.tar.gz (175 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 175.1/175.1 kB 4.5 MB/s eta 0:00:00
Installing build dependencies ... done
Getting requirements to build wheel ... error
error: subprocess-exited-with-error
× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> [54 lines of output]
running egg_info
writing lib3/PyYAML.egg-info/PKG-INFO
writing dependency_links to lib3/PyYAML.egg-info/dependency_links.txt
writing top-level names to lib3/PyYAML.egg-info/top_level.txt
Traceback (most recent call last):
File "/opt/octoprint/lib64/python3.12/site-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 353, in
main()
File "/opt/octoprint/lib64/python3.12/site-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 335, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/opt/octoprint/lib64/python3.12/site-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", line 118, in get_requires_for_build_wheel
return hook(config_settings)
^^^^^^^^^^^^^^^^^^^^^
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/build_meta.py", line 325, in get_requires_for_build_wheel
return self._get_build_requires(config_settings, requirements=['wheel'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/build_meta.py", line 295, in _get_build_requires
self.run_setup()
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/build_meta.py", line 311, in run_setup
exec(code, locals())
File "", line 271, in
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/init.py", line 103, in setup
return distutils.core.setup(**attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/_distutils/core.py", line 185, in setup
return run_commands(dist)
^^^^^^^^^^^^^^^^^^
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/_distutils/core.py", line 201, in run_commands
dist.run_commands()
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/_distutils/dist.py", line 969, in run_commands
self.run_command(cmd)
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/dist.py", line 963, in run_command
super().run_command(command)
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/_distutils/dist.py", line 988, in run_command
cmd_obj.run()
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/command/egg_info.py", line 321, in run
self.find_sources()
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/command/egg_info.py", line 329, in find_sources
mm.run()
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/command/egg_info.py", line 551, in run
self.add_defaults()
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/command/egg_info.py", line 589, in add_defaults
sdist.add_defaults(self)
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/command/sdist.py", line 112, in add_defaults
super().add_defaults()
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/_distutils/command/sdist.py", line 251, in add_defaults
self._add_defaults_ext()
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/_distutils/command/sdist.py", line 336, in _add_defaults_ext
self.filelist.extend(build_ext.get_source_files())
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "", line 201, in get_source_files
File "/tmp/pip-build-env-sd5l2k0v/overlay/lib/python3.12/site-packages/setuptools/_distutils/cmd.py", line 107, in getattr
raise AttributeError(attr)
AttributeError: cython_sources
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
Did the issue persist even in safe mode?
Yes, it did persist
If you could not test in safe mode, please state why ("currently printing" is NOT an excuse!)
No response
Version of OctoPrint
1.8.7
Operating system running OctoPrint
Fedora 39
Printer model & used firmware incl. version
AnyCubic Kobra2
Browser and version of browser, operating system running browser
Fedora
Checklist of files to include below
- Systeminfo Bundle (always include!)
- Contents of the JavaScript browser console (always include in cases of issues with the user interface)
- Screenshots and/or videos showing the problem (always include in case of issues with the user interface)
- GCODE file with which to reproduce (always include in case of issues with GCODE analysis or printing behaviour)
Additional information & file uploads
No response
Hi @EricAiken!
It looks like you didn't upload a system info bundle as requested by the template. A bundle is required to further process your issue. It contains important logs and system information to be able to put your issue into context and give pointers as to what has happened.
Please edit your original post above and upload a bundle zip file. Actually upload the file please and do not paste some link to a cloud provider, we want to have everything in one place here. Also do not unpack, repack or otherwise modify the bundle or its name, share it exactly like you get it from OctoPrint.
Without the availability of a bundle, your issue will have to be closed.
Thank you for your collaboration.
OctoPrint is not currently compatible with Python 3.12 - the upcoming OctoPrint 1.10 release adds this.
OctoPrint currently supports Python 3.7, 3.8, 3.9, 3.10 and 3.11
Gina's working on finalising the first release candidate today, but it might not drop today and could be next week instead.
Correction, I'm working on finalizing the first release candidate of 1.10.0. A release candidate phase will follow (usually takes anything between 2-6 weeks, depending on testing feedback and discovered regressions) and then the stable release will be rolled out.
edit hah, simultaneous edit
I run Fedora myself and with pyenv it's quite easy to have several Python versions available on the system. Give it a try maybe before downgrading?
In fact, I used pyenv to test various versions during development.
In other news, 1.10.0rc1 is out.