NuSkooler / bivrost

A socket server to shared socket descriptor bridge.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

bivrost!

A socket server to shared socket descriptor bridge.

General

bivrost! is a small utility mostly for working with DOOR32.SYS style socket file descriptor sharing in conjunction with systems such as ENiGMA½ BBS that do not support the feature directly. With bivrost! you can bridge the two.

bivrost! is released under Phenom Productions BBS mods! Snag a fresh release from your favorite super snazzy-pants BBS today!

Usage

bivrost! is fairly simple. Below is the current --help output:

bivrost! A socket server to shared socket descriptor bridge.
Copyright (c) 2018, Bryan D. Ashby

Usage: bivrost --port=<port> [--dropfile=<dropfile> --out=<out>] <target>
       bivrost --help | --version

Options:
  -h, --help             Show this message.
  --version              Show the version of bivrost!
  --port=<port>          Set server port in which to connect to.
  --dropfile=<dropfile>  Set DOOR32.SYS dropfile path.
  --out=<out>            Set output directory for new DOOR32.SYS.
                         If not specified, original DOOR32.SYS will
                         be overridden.

Notes:
  If <target> contains arguments, it should be quoted. For example: "DOOR.EXE /D -N 1"

  Arguments within <target> may also contain {fd} which will be substituted with the
  shared socket descriptor (the same value to be found in the output DOOR32.SYS).

  If your door does not use DOOR32.SYS you can omit --dropfile and --out and still
  use {fd}.

Standard usage currently mostly falls into one of two forms:

  1. Reading and producing a new DOOR32.SYS for a door to consume.
  2. Direct use where a DOOR32.SYS is not involved at all. For example, with NetFoss and 16-bit doors such as LORD. In this pattern, the {fd} param will be of use to you.

Examples

DOOR32.SYS

The following illustrates setting up Jezebel under Windows:

First, your menu.hjson may have an entry similar to the following:

doorJezebel: {
    desc: Jezebel
    module: abracadabra
    config: {
        name: Jezebel
        dropFileType: DOOR32
        cmd: "C:\\enigma-bbs\\utils\\bivrost.exe"
        args: [
            "--port"
            "{srvPort}",            //  bivrost! will connect this port on localhost
            "--dropfile",
            "{dropFilePath}",       //  ...and read this DOOR32.SYS produced by ENiGMA½
            "--out",
            "C:\\doors\\jezebel",   //  ...and produce a NEW DOOR32.SYS here.

            //
            //  Note that the final <target> params bivrost! will use to
            //  launch the door are grouped here. The {fd} variable could
            //  also be supplied here if needed.
            //
            "C:\\doors\\jezebel\\jezw32.exe C:\\doors\\jezebel\\door32.sys"
        ],
        nodeMax: 1
        tooManyArt: DOORMANY
        io: socket
    }
}

We've now told ENiGMA½ to launch Jezebel by way of proxy through bivrost!. When launched, bivrost! will perform the following basic steps:

  1. Connect up to the ENiGMA½ temporary socket server port supplied via --port.
  2. Read the DOOR32.SYS supplied at --dropfile and produce a new DOOR32.SYS containing the shared socket descriptor that Jezebel wants in the --out directory.
  3. Finally, launch Jezebel.

DOOR.SYS (Using Netfoss)

The following illustrates setting up L.O.R.D under Windows: This also requires the use of netfoss (http://pcmicro.com/netfoss/)

Note: There is no dropfile switch for bivrost here

LORD needs to be configured to get the DOOR.SYS directly from ENiGMA½ for each node

First, your menu.hjson may have an entry similar to the following:

doorLORD: {
    desc: LORD
    module: abracadabra
    config: {
        name: LORD
        dropFileType: DOOR
        cmd: "C:\\enigma-bbs\\utils\\bivrost.exe"
        args: [
            "--port={srvPort}" //  bivrost! will connect this port on localhost
            //  Note that the final <target> params bivrost! will use to
            //  launch the door are grouped here. The {fd} variable could
            //  also be supplied here if needed.
            //
            "C:\\doors\\netfoss\\nf.bat /N{node} /H{fd} C:\\doors\\LORD\\start.bat {node}"
        ],
        nodeMax: 5
        tooManyArt: DOORMANY
        io: socket
    }
}

We've now told ENiGMA½ to launch LORD through Netfoss by way of proxy through bivrost!. When launched, bivrost! will perform the following basic steps:

  1. Connect up to the ENiGMA½ temporary socket server port supplied via --port.
  2. Launch the NF Batch file which then calls LORD's start.bat with the node number.
  3. Finally, launch LORD.

License

BSD 2-Clause. See LICENSE.TXT.

About

A socket server to shared socket descriptor bridge.

License:BSD 2-Clause "Simplified" License


Languages

Language:Rust 100.0%