[Support]: Container will not start
janstadt opened this issue · comments
Describe the problem you are having
Im running unraid and using the official unraid appstore version of swatch with all the default docker configs (i've placed a config.yaml in the correct location i believe. container maps to /config/config.yaml).
Version
crzynik/swatch:latest
Swatch config file
# REQUIRED: Define a list of objects that are expected to be seen. These can be specific
# to one camera or common between many / all cameras
objects:
# REQUIRED: Name of the object
trash_can:
# REQUIRED: the list of color variants that this object can be detected as. Useful for
# different lighting conditions
color_variants:
# REQUIRED: the name of the color variant
default:
# REQUIRED: the lower R, G, B values that are considered a potential match for the
# color variant of the object.
color_lower: 70, 70, 0
# REQUIRED: the upper R, G, B values that are considered a potential match for the
# color variant of the object.
color_upper: 110, 100, 50
# OPTIONAL: the time range for when this color variant is allowed
# NOTE: make sure that /etc/localtime is passed to the container so it has valid time
time_range:
# OPTIONAL: Color variant is valid if current time is > this 24H time (Default: shown below).
after: "00:00"
# OPTIONAL: Color variant is valid if current time is < this 24H time (Default: shown below).
before: "24:00"
# OPTIONAL: the min area of the bounding box around groups of matching R, G, B pixels
# considered a true positive. This is not recommended to be set as a super small amount
# could be a false positive. (Default: shown below)
min_area: 1000
# OPTIONAL: the max area of the bounding box around groups of pixels with R, G, B
# values within the bounds to be considered a true positive (Default: shown below).
max_area: 100000
# OPTIONAL: the min ratio of width/height of bounding box for valid object detection (default: shown below).
min_ratio: 0
# OPTIONAL: the max ratio of width/height of bounding box for valid object detection (default: shown below).
max_ratio: 24000000
# REQUIRED: Define list of cameras that will be used for color detection.
cameras:
# REQUIRED: Name of the camera
porch:
# OPTIONAL: Frequency in seconds to run detection on the camera.
# a value of 0 disables auto detection (Default: shown below).
auto_detect: 0
# OPTIONAL: Configure the url and retention of snapshots. (Default: Shown Below)
snapshot_config:
# OPTIONAL: but highly recommended, setting the default url for a snapshot to be
# processed by this camera. This is required for auto detection (Default: none).
#url: "http://ip.ad.dr.ess/jpg"
# OPTIONAL: Whether or not to draw bounding boxes for confirmed objects in the snapshots (Default: shown below).
bounding_box: true
# OPTIONAL: Whether or not to save a clean png of the snapshot along with the annotated jpg (Default: shown below).
clean_snapshot: true
# OPTIONAL: Whether or not to save the snapshots of confirmed detections (Default: shown below).
save_detections: true
# OPTIONAL: Whether or not to save the snapshots of missed detections (Default: shown below).
save_misses: false
# OPTIONAL: Variations of snapshots to keep. Options are all, mask, crop (Default: shown below).
mode: "all"
# OPTIONAL: Number of days of snapshots to keep (Default: shown below).
retain_days: 7
# REQUIRED: Zones are cropped areas where the object can be expected to be.
# This makes searching / matches for efficient and more predictable than searching
# the entire image.
zones:
# REQUIRED: Name of the zone.
driveway_entry:
# REQUIRED: Coordinates to crop the zone by.
# NOTE: The order of the coordinates are: x, y, x+w, y+h starting in the top left corner as 0, 0.
coordinates: 225, 540, 350, 620
# REQUIRED: List of objects that may be in this zone. These correspond to
# the objects list defined previously and are matched by name.
objects:Relevant log output
ImportError: cannot import name 'url_quote' from 'werkzeug.urls' (/usr/local/lib/python3.11/site-packages/werkzeug/urls.py)
Traceback (most recent call last):
File "<frozen runpy>", line 198, in _run_module_as_main
File "<frozen runpy>", line 88, in _run_code
File "/opt/swatch/swatch/__main__.py", line 6, in <module>
from swatch.app import SwatchApp
File "/opt/swatch/swatch/app.py", line 16, in <module>
from swatch.http import create_app
File "/opt/swatch/swatch/http.py", line 10, in <module>
from flask import (
File "/usr/local/lib/python3.11/site-packages/flask/__init__.py", line 7, in <module>
from .app import Flask as Flask
File "/usr/local/lib/python3.11/site-packages/flask/app.py", line 27, in <module>
from . import cli
File "/usr/local/lib/python3.11/site-packages/flask/cli.py", line 17, in <module>
from .helpers import get_debug_flag
File "/usr/local/lib/python3.11/site-packages/flask/helpers.py", line 14, in <module>
from werkzeug.urls import url_quote
ImportError: cannot import name 'url_quote' from 'werkzeug.urls' (/usr/local/lib/python3.11/site-packages/werkzeug/urls.py)
Any other information that may be helpful
I've also tried configuring this with docker-compose using the following but with the same issues. The config locations are a bit different but still map to the correct locations in the container.
swatch:
container_name: swatch
image: crzynik/swatch
#depends_on:
# - nginx-proxy-manager
privileged: true
network_mode: swatch_network
restart: always
environment:
- PUID=${PUID}
- PGID=${PGID}
ports:
- "4500:4500"
- "4501:4501"
volumes:
- /etc/localtime:/etc/localtime:ro
- ${ROOT}/config/swatch/config/config.yaml:/config/config.yaml:ro #also tried just mapping the directories
- ${ROOT}/config/swatch/media:/media
Would be really great to get a docker-compose example in your documentation. I am running HA in a container and cant rely on HA Addons so i typically stand up my own containers and go from there.
I'm having this issue with the latest release as well. I was able to at least get it working standalone in Docker by rolling back to the 3.1.0 tag with the following docker-compose entry.
version: '3'
services:
swatch:
container_name: swatch
image: crzynik/swatch:3.1.0-2717ec6
volumes:
- /etc/localtime:/etc/localtime:ro
- swatch:/config/:ro
- swatch_media:/media/
ports:
- "4500:4500"
restart: unless-stopped
volumes:
swatch:
swatch_media:
According to https://stackoverflow.com/questions/77213053/why-did-flask-start-failing-with-importerror-cannot-import-name-url-quote-fr this is caused by a dependency conflict