Progress stalled after upload
robarnold opened this issue · comments
Rob Arnold commented
My issue looks similar to #3, but occurs when flashing over USB.
Whenever I run universal-silabs-flasher --verbose --device /dev/ttyACM0 flash --firmware silabs-firmware/Bootloader/NabuCasa_SkyConnect_BL_v2.1.1_115200.gbl
for my SkyConnect, I see this output and the command does not terminate. It looks like it is stalling just after upload, waiting for the menu to return.
Rob Arnold commented
Thank you for the quick fix! Will try it out on the next release to pypi.
puddly commented
Thanks! It should be up in a few moments.