Orbion The OpenSource Space Mouse
To ensure greater precision and fluidity it is recommended to put a foam ring under the knob (see photo above) and dielectric lubricant in the joystick!
If you notice that your joystick goes in different directions, you can change the direction, swapping the cables VRx and VRy or alternatively the variables horzPin and vertPin in the sketch (Find the joystick section above)
follow me for other news :P https://www.instagram.com/faq_t0tum/
The ORBION project is OpenSource so if you have the pleasure of supporting my next works I will be grateful fot the coffee.
PayPal: https://www.paypal.me/MattiaRusso308?locale.x=it_IT
Cad & 3D sculptors supported (continuously updated):
- Fusion360
- Autoocad
- SolidWork
- Solid EDGE
- Onshape
- Ansa
- ZBrush
- Blender
- Adobe Suite
- Rhino
- FreeCAD
Componets:
- M3x20 (7pcs)
- Nuts M3 (3pcs)
- Oled 1.3" I2C: https://s.click.aliexpress.com/e/_AtYDV6
- Encoder (KY-040): https://s.click.aliexpress.com/e/_AmjV9a
- Joystick (KY-023): https://it.aliexpress.com/item/1005002116584640.html?spm=a2g0o.productlist.0.0.2e2b50c7nvFgde&algo_pvid=6dde9e9f-ddc6-48b0-82c2-fe9a0bd0ef56&algo_exp_id=6dde9e9f-ddc6-48b0-82c2-fe9a0bd0ef56-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000018795085331%22%7D&pdp_pi=-1%3B3.78%3B-1%3B-1%40salePrice%3BEUR%3Bsearch-mainSearch (important: the joystick shaft must be 4mm)
- Arduino Pro Micro: https://s.click.aliexpress.com/e/_AYt9zi
- Push Button 8mm: https://s.click.aliexpress.com/e/_ADGxZS
- Foam