KieronQuinn / Gear360_OSS

An archival of the Gear 360 2016 and 2017 open source code and firmwares to workaround Samsung shutting down servers

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

S6 Edge issues

herbert-van-Vliet opened this issue · comments

Seems stuff no longer is available at Samsung's servers, but the link to the XDA forum is still relevant, as it got me the firmware file.
Your instruction for the updater.sh was also to the point and consistent with bankwing.
However, updater.sh would not run.

After some looking around and reading all sorts, I found this:
https://github.com/ottokiksmaler/gear360_modding
So I copied those files to the SD-card, connected to the camera with wifi, telnetted into it and started the updater.sh from there.

The updater.sh method alone seems to be not working for some, bankwing created a better method here: https://forum.xda-developers.com/t/mod-port-samsung-gear-360-manager-for-all-devices-updated-21-jan-21-v1-4-00-4-fw.3400383/page-95#post-84603699 if you need to do it again, I need to get round to updating the repo with this info.

Also seems you are correct that the open source files and firmware XMLs have been scrubbed from the servers now too. Good job the archives were got while we could then!