16 bit ALU

Building a 16 bit Arithmetic Logic Unit using the Mojo v3 FPGA and Lucid

This build requires an IO Shield for the Mojo

Installation guide for Xilinx, MojoLoader and MojoIDE can be found here.

Building Project from Mojo IDE:

Upon creating a new project, select "IO Shield Base" from the From Example dropdown. Under the Project tab, select "Add Components...". Under Miscellaneous, add components "Counter" and "Decoder" to the project.

General Outline of ALU:

Adder/Subtractor Unit
Compare Unit
Boolean Unit
Shifter Unit
Multiplier Unit (Extra)

Input of ALU: 16 bit binary number a 16 bit binary number b 6 bit binary number aufn[6:0]

Output of ALU: 16 bit binary number ALU 1 bit boolean z 1 bit boolean v 1 bit boolean n

Adder/Subtractor Unit:

  Either adds a to b or subtracts a from b depending on alufn[0]

  Input: a, b, alufn[0]
  Output: sum, z, v, n
  
  sum is a 16 bit binary number
  *sum might overflow
  
  if (alufn[0] == 0):
    sum = a+b
  if (alufn[0] == 1):
    sum = a-b
    
  z is true if all bits of sum are 0
  v is true if there is an overflow during calculation
  n is true if sum is a negative number

Compare Unit:

  Checks if a is equal to, less than, less than or equal to b depending on alufn[2:1]

  Input: a, b, alufn[2:1]
  Output: cmp
  
  cmp is a 16 bit binary number
  
  cmp[15:1] = 0
  if (output of comparison is true):
     cmp[0] = 1
  if (output of comparison is false):
     cmp[0] = 0

Boolean Unit:

Outputs boolean operations such as AND, OR, XOR, "A", on a and b

Input: a, b, alufn[3:0]
Output: bool

bool is a 16 bit binary number

bool applies the logic based on alufn[3:0]

Operation   alufn[3:0]
  AND         1000
  OR          1110
  XOR         0110
  “A”         1010

Shifter Unit:

  Outputs a after it has been shifted by b bits. The type of shift depends on alufn[1:0]

  Input: a, b, alufn[1:0]
  Outut: shift
  
  shift is a 16 bit binary number
  
  Operation                               alufn[1:0]
  SHL (shift left)                            00
  SHR (shift right)                           01
  SRA (shift right with sign extension)       11
  Mul                                         10

Multiplier Unit:

  Multiplier Unit is not part of a basic ALU and has been added as an additional feature
  Multiplies two unsigned 8 bit binary numbers to produce a 16 bit binary number
  
  Input: a[7:0], b[7:0]
  Output: mul
  
  mul is a 16 bit binary number

ALU:

  Outputs the final 16 bits as well as z, v, n
  
  Depending on alufn[5:4], selects one of the outputs from the adder, compare, boolean or shifter units
  Always outputs z,v,n from the adder unit

ALUFN OPCODE:

Operation	ALUFN[5:0]
ADD	000000
SUB	000001
AND	011000
OR	011110
XOR	010110
“A”	011010
SHL	100000
SHR	100001
SRA	100011
CMPEQ	110011
CMPLT	110101
CMPLE	110111
MUL	100010

JinBean / 16bitALU