Copy minisatip configuration from stock firmware on Grund GSSBOX
rubenkr opened this issue · comments
Hi, I try to get minisatip working with following setup:
- Quad LNB
- One coax cable attached to adapter #0
- Device: Grundig GSS400 SAT >IP latest firmware from here
Problem
- On Stock FW Version V1.25.0.157 DVB-S scan is working (see screens below)
- On latest minisatip 1.2.47~436a845 Command line: minisatip -f -g -z /etc/sysconfig/minisatip -Z *:0 -W 0 it is not working
How can I simply copy the stock firmwares settings into command line code for minisatip? Sorry for the beginner question but I could not find any solution in the git repos. THank you very much !
Screens
As far as I can tell you shouldn't need any specific options. I would recommend installing build 22 instead, there have been many reported issues with builds 23 and 24-rc1.
Since your question is not really related to the firmware but minisatip itself I think you should ask on minisatip.org instead, or the minisatip issue tracker.
Confirmed. This is a too general question no issue. And additionally you solved my problem by your hint to not add any additional commands to minisatip. IT WORKS !!!! THANK YOU SO MUCH ! Minä rakastan sinua!