all.yaml bastion.options.dns: false results in bastion resolv.conf of forwarder NOT nameserver1

[ryoung1us]

Expected Results
With bastion.options.dns: false and bastion.networking.nameserver1 9.76.61.94
bastion resolv.conf should contain 9.76.61.94

Actual results:

[root@bastion network-scripts]# cat ifcfg-enc1
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=none
IPADDR=9.76.61.82
PREFIX=24
GATEWAY=9.76.61.1
DNS1=9.76.61.94
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=no
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=eui64
NAME=enc1
UUID=448a3561-0ca3-45e9-b0b3-545695619c1f
DEVICE=enc1
ONBOOT=yes
[root@bastion network-scripts]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enc1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 52:54:00:45:d4:96 brd ff:ff:ff:ff:ff:ff
inet 9.76.61.82/24 brd 9.76.61.255 scope global noprefixroute enc1
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe45:d496/64 scope link
valid_lft forever preferred_lft forever
[root@bastion network-scripts]#
[root@bastion network-scripts]#
[root@bastion network-scripts]# cat /etc/resolv.conf
search ocp1.ibm.com
nameserver 9.0.0.2[root@bastion network-scripts]#

all.yaml bastion section

Section 5 - Bastion

bastion:
create: True
vm_name: bastion
resources:
disk_size: 30
ram: 8192
swap: 4096
vcpu: 4
networking:
ip: 9.76.61.82
hostname: bastion
base_domain: ocp1.ibm.com
subnetmask: 255.255.255.0
gateway: 9.76.61.1
nameserver1: 9.76.61.94

nameserver2:

  forwarder: 9.0.0.2
  interface: enc1
access:
  user: admin1
  pass: its0
  root_pass: its0
options:
  dns: False
  loadbalancer:
    on_bastion: True
    public_ip: 9.76.61.80
    private_ip: 9.76.71.80