Giters

Hieromon / AutoConnect

An Arduino library for ESP8266/ESP32 WLAN configuration at runtime with the Web interface

Home Page:https://hieromon.github.io/AutoConnect/

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Wrong Arcithecture

Tipmanfrank opened this issue · comments

commented

I am using Arduino IDE 2.0.3. When I compile I get the following fault:

In file included from C:\Users\FrankRosendahlLarsen\AppData\Local\Arduino15\libraries\SD\src/utility/Sd2Card.h:26:0,
from C:\Users\FrankRosendahlLarsen\AppData\Local\Arduino15\libraries\SD\src/utility/SdFat.h:29,
from C:\Users\FrankRosendahlLarsen\AppData\Local\Arduino15\libraries\SD\src/SD.h:20,
from c:\Data\Privat\Arduino\libraries\AutoConnect\src/AutoConnectCredential.h:37,
from c:\Data\Privat\Arduino\libraries\AutoConnect\src/AutoConnectCore.hpp:35,
from c:\Data\Privat\Arduino\libraries\AutoConnect\src/AutoConnectCoreImpl.hpp:13,
from c:\Data\Privat\Arduino\libraries\AutoConnect\src/AutoConnectExt.hpp:15,
from c:\Data\Privat\Arduino\libraries\AutoConnect\src/AutoConnectExtImpl.hpp:13,
from c:\Data\Privat\Arduino\libraries\AutoConnect\src/AutoConnect.h:15,
from C:\Data\Privat\Arduino\Projekter\Autoconnect1_DISP_IP_v1_virker\Autoconnect1_DISP_IP_v1_virker.ino:3:
C:\Users\FrankRosendahlLarsen\AppData\Local\Arduino15\libraries\SD\src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
#error Architecture or board not supported.
^
Multiple libraries were found for "SD.h"
Used: C:\Users\FrankRosendahlLarsen\AppData\Local\Arduino15\libraries\SD
Not used: C:\Users\FrankRosendahlLarsen\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.6\libraries\SD
exit status 1

Compilation error: exit status 1

I have chosen ESP32 Dev board before compiling. I have AutoConnect 1.4.1. What causes this fault? I have the same fault when I compile any of the examples.

commented

Your Arduino library environment is confusing due to several different SD libraries.

C:\Users\FrankRosendahlLarsen\AppData\Local\Arduino15\libraries\SD\src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
#error Architecture or board not supported.

This message is emitted by the SD library for the Arduino AVR, not for the Espressif core. Are you sure you have chosen the right board?
Additionally you are using ESP32 arduino core version 1.0.6. Is this your intention?

C:\Users\FrankRosendahlLarsen\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.6\libraries\SD

commented

I uninstalled my Arduino 1 and 2 and removed all libraries. Then installed 2.0.3 and now it works.
I hate the 2.0.3 for compiling very slowly.
Problem solved.

commented

Close due to solved.