More than one thread/instance for each GPU
dadoqui opened this issue · comments
Hi , firs thanks for all the work yo are doing, sorry my bad english .
Are you planing to add more than one thread/instance for each GPU, as you are using silentarmy kernel is posible to double the hashing power for each gpu , as xtremal miner?
I don like xtremal miner because it forces to use a especific pool and the fee and the cashout are to hight.
Now I am runing y litle rig 3 x rx 470 moded bios and i have 22 Sol/s on each graphic card.
Thanks Again
Use -k zec zec switch at the end of your config in the bat file
GPU needs at least 4GB preferably 8GB of Ram
Something like what I use below..
:loop
genoil.exe -f 2 -c eu1-zcash.flypool.org:3333 -u "your address" -p z -z 1 -k zec zec
timeout /t 1 /nobreak
goto :loop
Thanks for your answer my cards are 4gb Saphire Nitro.
Now i am trying runing 2 separated instances and i have 80 Sols/s
26,6 on each card.
what do this line on your bat : timeout /t 1 /nobreak
It basically restarts the miner if it crashes as genoils is still unstable.
Thanks.
Hi. When you run -k zec zec for more than one thread does it shows double the total or the output of two threads?
I have two 390x
06:37:45 main : : 0.0S/s zec-sa#3: 36.6S/s zec-sa#5: 31.6S/s total: 68.1S/s
06:37:50 main : : 0.0S/s zec-sa#3: 36.8S/s zec-sa#5: 38.6S/s total: 75.3S/s
After monitoring the pool I concluded that ZEC ZEC does not help with 390x