Channel Overrides are allowed to go past outputs

[Craig]

Is there an existing issue for this problem?

• I have searched the existing issues

What part of EdgeTX is the focus of this bug?

Transmitter firmware

Current Behavior

test model.zip
With the above model I have set the low throttle to -83.0 on the outputs (1075us)

If I set a special function (sa - middle) to override channel to -100

It sets the the output to 988us

Expected Behavior

Outputs are there to restrict servo binding e.g. total output limits
Why are special functions (override channels) allowing a channel to be over driven?

Steps To Reproduce

1. with model attached
2. on outputs page set sa -

Version

2.10.3

Transmitter

FrSky X9D+2019

Operating System (OS)

Windows

OS Version

Windows 10 x64

Anything else?

No response

[Peter Feerick]

If I had to guess, I would guess it was in the name... It is an override... Not a fake input, not a default. This is one of the reasons using a additional mixer line controlled by a switch is preferred. They each have their place. It's really up to you to configure them correctl.

…

On Sat, 17 Aug 2024, 6:54 am Craig, ***@***.***> wrote: Is there an existing issue for this problem? - I have searched the existing issues What part of EdgeTX is the focus of this bug? Transmitter firmware Current Behavior test model.zip <https://github.com/user-attachments/files/16641569/test.model.zip> With the above model I have set the low throttle to -83.0 on the outputs (1075us) image.png (view on web) <https://github.com/user-attachments/assets/350a8278-344a-4292-acde-658043990410> If I set a special function (sa - middle) to override channel to -100 image.png (view on web) <https://github.com/user-attachments/assets/3fd49bba-4dc0-42c5-a1ac-cafb4354fd55> It sets the the output to 988us image.png (view on web) <https://github.com/user-attachments/assets/5c6d541d-2e0e-424e-a8bf-3aa92e7d848a> Expected Behavior Outputs are there to restrict servo binding e.g. total output limits Why are special functions (override channels) allowing a channel to be over driven? Steps To Reproduce 1. with model attached 2. on outputs page set sa - Version 2.10.3 Transmitter FrSky X9D+2019 Operating System (OS) Windows OS Version Windows 10 x64 Anything else? *No response* — Reply to this email directly, view it on GitHub <#5446>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJ66KJP4YEKOEPLXTBQSCTZRZRKDAVCNFSM6AAAAABMUWLZX2VHI2DSMVQWIX3LMV43ASLTON2WKOZSGQ3TCMBQGAYDQMA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[3djc]

By design

[Craig]

Fair enough