Lumina enclosure top
derfeznoj opened this issue · comments
I may not know what's going on, but I'm finding a potential issue with the .stl for the enclosure top.
Notes
- In the slicer layer view I see an odd cross section with the Lumina logo in the middle of the slice view
- I opened the top .stl in Meshmixer and am seeing what appear to be 2 top models stacked on top of each other
- One shell has what appears to be the Lumina logo, the other doesn't
- I separated the shells and exported each individually
- When I look at the slicer layers for each split shell one has the Lumina logo, the other doesn't
- I'm thinking that maybe one of the shells was not removed when the shell with logo was exported, but I'm not the expert here
Thank you for pointing this out. You are correct. There was an error in the .stl for the enclosure top. I deleted it and replaced it with the correct .stl file.
Thanks for the update.
Another option might be to include both the top with logo and top without. Then those of us with multifilament printers can then embed the logo into the top rather than having to print a recess with support.
Good suggestion. I added an enclosure top without the logo.