Unable to emulate classic Mifare classic 1k iso 144443-3(nfc-a)

Question

Unable to emulate classic Mifare classic 1k iso 144443-3(nfc-a)

Pmacdon15 opened this issue 5 months ago · comments

Patrick MacDonald commented 5 months ago

Describe the bug.

I am able to read card no problem, how ever when I try to ready an emulated card from the flipper on my Arduino RFID scanner, the scanner can read the cards but not the flipper. I also tried an NFC app on my phone which reads the cards same info but dose not read the flipper. I had unleashed 66 which mentions something, I updated to 67, still have the same issue.

Reproduction

read card
emulate card
no card read

Target

No response

Logs

No response

Anything else?

Also I just tried using the Mifare fuzzer and my phone and the Arduino reader picked up nothing. It seems the flipper can read cards but not emulate them. Im on the flipper community page and it says this is a problem since stock firm wear 94 and 93 doesn't have these issues.

Mykola Grybyk · Answer 1 · Sun Dec 31 2023 02:52:00 GMT+0800 (China Standard Time)

Does it work for you on 65?

Patrick MacDonald · Answer 2 · Sun Dec 31 2023 02:56:23 GMT+0800 (China Standard Time)

It did not, but I didn't wipe the SD card. Would that have an effect? I also tried with stock 93 and it said there was an api miss match when I tried to use the nfc app. Does updating the firmware automatically update the apps on the SD card or do I have to wipe the SD card and then update the firmware to 65 and see if it works? Get Outlook for Android<https://aka.ms/AAb9ysg>

…

________________________________ From: Mykola Grybyk ***@***.***> Sent: Saturday, December 30, 2023 11:52:12 AM To: DarkFlippers/unleashed-firmware ***@***.***> Cc: Patrick Macdonald ***@***.***>; Author ***@***.***> Subject: Re: [DarkFlippers/unleashed-firmware] Unable to emulate classic Mifare classic 1k iso 144443-3(nfc-a) (Issue #685) Does it work for you on 65? — Reply to this email directly, view it on GitHub<#685 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A6WGEVDMBCZYEP5GARIYCWTYMBPFZAVCNFSM6AAAAABBGE53EKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNZSGU4DGMZTGM>. You are receiving this because you authored the thread.Message ID: ***@***.***> This message and any attached documents are only for the use of the intended recipient(s), are confidential and may contain privileged information. Any unauthorized review, use, retransmission, or other disclosure is strictly prohibited. For information about how BVC is in compliance with the Canadian Anti-Spam Legislation (CASL), please visit our CASL Information Page or copy and paste the following URL into your web browser: https://bowvalleycollege.ca/casl. If you feel that you have received this message in error, notify the sender immediately, and delete the original message.

Patrick MacDonald · Answer 3 · Mon Jan 01 2024 05:34:25 GMT+0800 (China Standard Time)

its very strange to me that the issue seems to be happening on the stock firmware after 93 as well.

Patrick MacDonald · Answer 4 · Mon Jan 01 2024 08:54:43 GMT+0800 (China Standard Time)

Withdrawing the issue. Although I can not read emulated on the Arduino, it works on my phone after I took the case off. So I do not believe it is an issue. Sorry again and thank you for your time, great work here.