📜 Scribe 📜

Scribe is a compact Yul transpiler written in Rust that targets the Polygon Miden VM. Scribe works by compiling Yul down to Miden opcodes, allowing developers to write smart contracts in Yul and run them on Polygon Miden. Since Yul is the intermediate language for Solidity, Vyper and Yul+ Scribe is a great foundation for various smart contract languages to compile code to run on Polygon Miden.

Status

WARNING: This project is in an alpha stage. It has not been audited and may contain bugs and security flaws. This implementation is NOT ready for production use.

Parsing

All yul syntax is parsed, including the new typed identifier list syntax.

Data blocks are not transpiled. Objects are naively transpiled as a series of statements.

Types

Because u256 operations are so expensive in miden, scribe will check whether variables and parameters are typed, and if they're u32 values, then we can use the much cheaper miden u32 operations. Scribe will default to u256.

Supported yul functions

Function	u32	u256	notes
add	✅	✅
mul	✅	✅
sub	✅	✅
div	✅	❌
and	✅	✅
or	✅	✅
xor	✅	✅
mstore	✅	✅	address must be u32
mload	✅	✅	address must be u32
iszero	✅	✅
eq	✅	✅
lt	✅	✅
gt	✅	✅
gte	✅	✅
lte	✅	✅
shl	✅	❌
shr	✅	❌

Miden Repl

Scribe features a REPL to write miden assembly. You can start the repl with:

cargo run -- repl

From within the repl, you can write any valid miden assembly, then check the stack with stack, or check your whole program with program. Anything that errors out will not be added to the program. You can undo the last command with undo.

$ cargo run -- repl

>> push.4

>> push.5 push.7 mul

>> stack

  35 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0

>> program

  begin
      push.4
      push.5 push.7 mul
  end

>> undo
  Undoing push.5 push.7 mul

>> stack

  4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

>> help

  Available commands:

  stack: display the stack
  undo: remove the last instruction
  program: display the program

How Does it Work?

Scribe is built with Rust and uses the Pest parser to be able to recognize Yul Grammar. Scribe then translates the Yul code to the Miden VM opcodes, enabling fully functional Miden assembly can be generated from Yul. Since languages like Solidity and Vyper compile to Yul before generating EVM opcodes, in future versions of Scribe, it will be possible to transpile code written in Solidity or Vyper, into Miden assembly!

Lets take a closer look at how Scribe works under the hood.

First, Scribe reads in all of the Yul contracts in the Scribe/contracts directory. While Scribe can transpile entire Yul contracts, for this walkthrough we will just use a simple snippet of Yul code. We'll use u32 annotations so that the output is more readable, but this example will also work with u256 values.

      
 object "fib" {
  code {
            let n:u32 := 10
            let a:u32 := 0
            let b:u32 := 1
            let c:u32 := 0

            for { let i:u32 := 0 } lt(i, n) { i := add(i, 1)}
            {
                c := add(a,b)
                a := b
                b := c
            }
            b
  }
}

Once the Yul code is read in, Scribe converts the code into a string and passes it into the parse_yul_syntax function. From there, Scribe parses the string, looking for Yul grammar and generates an Expr for each match.

pub enum Expr {
   Literal(ExprLiteral),
   FunctionDefinition(ExprFunctionDefinition),
   FunctionCall(ExprFunctionCall),
   IfStatement(ExprIfStatement),
   Assignment(ExprAssignment),
   DeclareVariable(ExprDeclareVariable),
   ForLoop(ExprForLoop),
   Block(ExprBlock),
   Switch(ExprSwitch),
   Case(ExprCase),
   Variable(ExprVariableReference),
   Repeat(ExprRepeat),
   Break,
   Continue,
   Leave,
}

Each Expr is pushed to a Vec<Expr>, which is then passed into the miden_generator::transpile_program() function. This function generates the Miden opcodes and keeps track of the variables as well as open memory addresses.

The transpiled code from the fibonacci example looks like this:

begin                                                                                                                                                                                                                                                                                 [30/1924]
    # Assigning to n #
        # u32 literal 10 #
        push.10

    # Assigning to a #
        # u32 literal 0 #
        push.0

    # Assigning to b #
        # u32 literal 1 #
        push.1

    # Assigning to c #
        # u32 literal 0 #
        push.0

    # Assigning to i #
        # u32 literal 0 #
        push.0

    # -- conditional -- #
    # lt() #
    # pushing i to the top #
        dup.0
    # pushing n to the top #
        dup.5
    lt
    while.true
        # -- interior block -- #
            # Assigning to c #
                # add() #
                # pushing a to the top #
                    dup.3
                # pushing b to the top #
                    dup.3
                add
            # Assigning to a #
                # pushing b to the top #
                    dup.3
            # Assigning to b #
                # pushing c to the top #
                    dup.1

        # -- after block -- #
            # Assigning to i #
                # add() #
                # pushing i to the top #
                    dup.3
                # u32 literal 1 #
                push.1

                add

            # cleaning up after branch #
                # pushing n to the top #
                    movup.8
                # pushing a to the top #
                    movup.3
                # pushing b to the top #
                    movup.3
                # pushing c to the top #
                    movup.4
                # pushing i to the top #
                    movup.4

        # -- conditional -- #
            # lt() #
            # pushing i to the top #
                dup.0
            # pushing n to the top #
                dup.5
            lt

    end

    # pushing b to the top #
        dup.2
end

Now the generated Miden code is ready to run! Scribe can test your code on the Miden VM by starting the VM, passing in the Miden code and calling the executor. Here is what the process looks like from start to finish!

//Parse the Yul code
let parsed_yul_code = parser::parse_yul_syntax(yul_code);

//Generate Miden opcodes from the parsed Yul code
let miden_code = miden_generator::transpile_program(parsed);

//Execute the Miden code on the Miden VM
let execution_value = executor::execute(miden_code, inputs).unwrap();
let stack = execution_value.last_stack_state();
let last_stack_value = stack.first().unwrap();

//Print the output
println!("Miden Output");
println!("{}", last_stack_value);

And here is the output!

Miden Output
89

How to transpile your own contract.

To transpile and test your own contracts simple drop your own Yul Contracts inside the contracts folder then transpile then by running the transpiler crate with cargo run. Note that some Yul operations are still unsupported, but basic arithmatic, and control structures are supported, as well as variables.

Scribe was meant to focus on real world applicability, and because of this uses Miden v0.2. Due to Miden v0.2 not being done yet certain crates of it like the zk prover are broken atm as the developers build away on the new release. So certain functionality like zk proof generation can't be done at the moment, but execution can still be tested in the zk VM environment.

First clone this repo and download its submodule

git clone https://github.com/ControlCplusControlV/Scribe
cd Scribe
git submodule init
git submodule update

then cd into the transpiler crate

cd transpiler

Then init the git submodule, and you should be good to go!

Contributing

Testing

Scribe has unit tests and integration tests that can be run with cargo test

Our parsing tests use the insta snapshot-testing crate. After running a new test, run cargo insta review, verify that the generated AST looks right, then accept the output as correct. In future tests the output will be compared to this snapshot.

ControlCplusControlV / Scribe