issues flashing MX25U51245GZ4I00
wesk1 opened this issue · comments
Hello,
Im trying to flash a MX25U51245GZ4I00, but its not working.
i used the following cmds
in this repo
make clean
make PATCH_PARAMS="--device=zelda" flash_patched
in the retro-go repo
make clean
In this example, I'm assuming you have a 64MB flash chip (60 = 64 - 4)
make -j8 EXTFLASH_SIZE_MB=60 EXTFLASH_OFFSET=4194304 INTFLASH_BANK=2 flash
im not sure if i need to modify the make file before running cmd, i do get to the erase part but when it tries to do the next step i goes to another screen….see attachment, at first i kept getting cannot communicate with external flash, i reflowed the chip then the following message started to appear.
thanks in advance
I'm not 100% sure, but you might have a bad connection to your chip. You might find more interactive help in the stacksmashing discord. If you do find the issue, please post back here you solution!
I grabbed a new chip, used lead solder this time it looks like its working, flashing ok in retro.