BD8NCF / cliprobe

探测场内wifi设备信息

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

介绍

cliprobe 用于探测网络中的wifi客户,无需用户链接,进入网络后主动探测。并根据多台ap的反馈信号,计算出设备在场地内的坐标。

核心代码:

ap等路由系统上的报文抓取(未开源) server端根据汇报数据计算client位置

对应web:

一、基于用户做统计 1、用户mac地址 2、设备类型 3、首次到场时间 4、最近到场时间 5、平均每次在场时间与在场总时间 6、指定时间用户活跃排名(自选默认)

二、基于场地做统计 1、用户mac地址,用户到场时间, 1、场地每天总人数 2、平均在店时间 3、在场人数在不同时间的曲线(采样时间自选) 4、用户活跃区域图

三、报表 基于以上统计信息,每天,每周,每月,每季度出统计表

编译执行

make 只生成client

make server 生成服务端

运行

客户端

客户端运行在任何支持monitor mode的机器上。不仅仅可以运行在路由器。 检查是否支持:iw phy查看Supported interface modes:

./cliprobe 
USAGE: probe wlan0 mon0 server minsig debug
e.g:
./cliprobe wlan0 mon0 192.168.10.119 70 0

minsig: 最小关心信号强度,注意没有负号

服务端

配置文件: /etc/clipos/serprobe.conf ap位置配置文件: /etc/clipos/ap.conf

[jianxi@Jianxi cliprobe]$ ./server/serprobe  --help
USAGE: serprobe [options]
  -a, --apconf           ap position config file (default /etc/clipos/ap.conf)
  -t, --agetime          ap report age time (default 5s)
  -l, --losttime         client lost age time (default 300s)
  -i, --dis              sample distance  (default 1m)
  -s, --sig              sample distance signal (default 53)
  -f, --fac              default factory 2.5 ~ 5 (default 4.5)
  -r, --drift            default drift (default 1)
  -m, --minsig           min signal get in calculate (default -70)
  -d, --daemon           daemon mode
  -b, --debug            enable debug will auto disable daemon_mode
  --help                 help info

正常参数不需要修改, 长期修改请修改配置文件。 正式部署时,请启动daemon 模式 serprobe -d

数据库

mysql数据库, 数据库配置使用my.cnf, 使用[serprobe] section.

数据库:cliprobe 表: clipos, user

climac: 8字节存储,后6字节为mac地址

macstr: mac地址字符串表示形式

x,y,z: 坐标

time: 时间戳

first_time: 客户端首次出现时间

last_time: 客户端最近一次出现时间

CREATE TABLE IF NOT EXISTS clipos (
	climac BIGINT NOT NULL,
	macstr CHAR(17) NOT NULL, 
	x DOUBLE, 
	y DOUBLE, 
	z DOUBLE, 
	time TIMESTAMP
);

CREATE TABLE IF NOT EXISTS  user (
	climac BIGINT NOT NULL,
	macstr CHAR(17) NOT NULL,
	first_time DATETIME NOT NULL,
	last_time DATETIME NOT NULL,
	primary key (climac)
);

存储

  • 8 + 17 + 8 + 8 + 8 + 4 = 53B
  • 活跃信息,每2秒一条记录
  • 程序设计最大用户10000人
  • 每天开业12小时

综上:

12 * 3600 / 2 * 10000 * 53 = 11,448,000,000B (11,179,687KB, 10,917.7MB, 10.7GB)

About

探测场内wifi设备信息


Languages

Language:C 95.9%Language:Makefile 2.1%Language:ApacheConf 2.0%