ODI DFP-34X-2C2 + Realtek 2.5Gb Media Converter with Router with LibreCMC on Movistar/O2. EDIT: It works
libr3 opened this issue · comments
Currently, I'm using Ufiber NanoG as ONT, Cisco ATA 191 for VoIP and a router with LibreCMC in Movistar/O2, an ISP from Spain. Issue #214 will be useful for this installation.
I would like use LibreCMC instead of other router device.
-
Could I replace my ONT by Realtek 2.5Gb Media Converter with ODI DFP-34X-2C2 as SFP module and to use yet the router with LibreCMC for to manage the network (VLAN for Internet + VLAN for VoIP)?
Yes. It works. -
How I should configure the ODI device for to allow the full control of VLAN to LibreCMC device?
- On VLAN Settings:
Manual -> Transparent mode -
What ports of Ethernet from LibreCMC would be Internet VLAN and VoIP VLAN (for Cisco ATA)?
You can to choose your prefer Ethernet port for VoIP VLAN and for Internet VLAN
Finally, I could replace original Movistar O2 from Spain installation of GPT-2541GNAC by ODI DFP-34X-2C2 + Realtek 2.5Gb Media Converter and LibreCMC router NanoPi R4S.
The VLAN IDs was obtained with SSH to ODI DFP-34X-2C2 by:
# omcicli mib get 84
The result was:
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityID: 0x03
FilterTbl[0]: PRI 0,CFI 0, VID 999
FwdOp: 0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0x04
FilterTbl[0]: PRI 0,CFI 0, VID 3
FwdOp: 0x10
NumOfEntries: 1
=================================
VID 999 is Internet VLAN ID
VID 3 is VoIP VLAN ID