Alter0ne / rtl8196e

OpenWRT for Realtek rtl8196e with working packages and USB

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Failed to initialise xz decompressor

Alter0ne opened this issue · comments

commented

[ 2.600000] SQUASHFS error: Failed to initialise xz decompressor
Now I can't find solution for xz decompressor bug. It's need to fulfil latest mtd_utils or make possible compilation with old glibc 2.28.

commented

@Alter0ne
Built a firmware on Ubuntu 18.04 and reverted the 16cf429 commit, but received the following:

[    1.340000] SPI INIT
[    1.350000]  ------------------------- Force into Single IO Mode ------------------------ 
[    1.360000] |No chipID  Sft chipSize blkSize secSize pageSize sdCk opCk      chipName    |
[    1.370000] | 0 c22017h  0h  800000h  10000h   1000h     100h   50    0   MX6405D/05E/45E|
[    1.380000]  ---------------------------------------------------------------------------- 
[    1.390000] SPI flash(MX6405D/05E/45E) was found at CS0, size 0x800000
[    1.410000] Creating 3 MTD partitions on "flash_bank_1":
[    1.420000] 0x000000000000-0x000000010000 : "boot"
[    1.440000] 0x000000010000-0x000000800000 : "linux"
[    1.460000] 0x000000130000-0x000000800000 : "rootfs"
[    1.480000] mtd: device 2 (rootfs) set to be root filesystem
[    1.490000] mtd: partition "rootfs_data" created automatically, ofs=0x2df000, len=0x521000
[    1.500000] 0x0000002df000-0x000000800000 : "rootfs_data"
[    1.520000] 
[    1.520000] Probing RTL819X NIC-kenel stack size order[1]...
[    2.200000] eth0 added. vid=9 Member port 0x10f...
[    2.210000] eth1 added. vid=8 Member port 0x10...
[    2.220000] [peth0] added, mapping to [eth1]...
[    2.230000] usbcore: registered new interface driver usb-storage
[    2.240000] -------8196D OTG init 
[    2.460000] dwc_otg: version 2.60a 22-NOV-2006
[    2.470000] DWC_otg: OTG Device not found ! Bad value for SNPSID: 0x00000000
[    2.490000] TCP: westwood registered
[    2.500000] NET: Registered protocol family 17
[    2.510000] 8021q: 802.1Q VLAN Support v1.8
[    2.530000] SQUASHFS error: Filesystem uses "lzma" compression. This is not supported
[    2.540000] List of all partitions:
[    2.550000] 1f00              64 mtdblock0  (driver?)
[    2.560000] 1f01            8128 mtdblock1  (driver?)
[    2.580000] 1f02            6976 mtdblock2  (driver?)
[    2.600000] 1f03            5252 mtdblock3  (driver?)
[    2.610000] No filesystem could mount root, tried:  squashfs
[    2.620000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)
[    2.620000] System halted.

Not sure why it thinks it's LZMA rather than XZ, rootfs is definately using XZ compression. Any ideas?
(Thanks you've been very helpful)

I think it's aproblem with bootloader.