Wrong I2C OLED Pinout

[Lui]

The Current Schematic for the Europi has the wrong pinout (channel for the I2C

It puts the OLED in the Channel 1 (GPIO 3,4) while the europy.pi shows the OLED using the Channel 0 and GPIO (0,1).

https://github.com/Allen-Synthesis/EuroPi/blob/403bb71e46a45aa9f24a37b120dfb2662cd729ce/software/firmware/europi.py#LL578C21-L578C21

I didnt check the KiCAD file, but this is from the PDF. Hope it gets updated