A library for interfacing GQ Electronics radiation measurement devices.
The following protocols have been implemented :
The following device units have been TESTED with this software :
The following device units have been implemented in this software:
The following device units will probably some day be implemented in this software:
- GMC-280
- GMC-300
- GMC-300+
- GMC-320
- GMC-320+
$ gqe-cli --help
$ gqe-cli /dev/tty.wchusbserialfd120 --help
$ gqe-cli /dev/tty.wchusbserialfd120 --unit GQEMF390 --revision 'Re 2.51' --help
Replace /dev/tty.wchusbserialfd120 with the path to the COM RS232 interface the unit is connected to.
$ ./gqe-cli /dev/tty.wchusbserialfd120 --help
usage: gqe-cli [--unit UNIT] [--revision REVISION] [--out-file OUT_FILE]
[--in-file IN_FILE] [--format FORMAT] [--help] [--echo ECHO]
[--get-battery-voltage] [--get-cfg] [--get-dsid] [--get-ef]
[--get-emf] [--get-gyroscope] [--get-identity] [--get-mode]
[--get-rf GET_RF] [--get-screen] [--get-serial] [--get-xyz]
[--key-hold KEY_HOLD] [--key-press KEY_PRESS] [--play PLAY]
[--power POWER] [--reboot] [--reset-factory] [--reset-rf-peak]
[--rtc-get] [--rtc-set-date-dd RTC_SET_DATE_DD]
[--rtc-set-date-mm RTC_SET_DATE_MM]
[--rtc-set-date-yy RTC_SET_DATE_YY]
[--rtc-set-time-hh RTC_SET_TIME_HH]
[--rtc-set-time-mm RTC_SET_TIME_MM]
[--rtc-set-time-ss RTC_SET_TIME_SS] [--rtc-sync]
[--speaker SPEAKER] [--spectrum-get-band-data]
[--spectrum-reset] [--spectrum-scan-complete]
[--spectrum-set-band SPECTRUM_SET_BAND] [--spi-erase]
[--spi-get] [--wait WAIT]
port
LibGQE Command Line Interface.
optional arguments:
--out-file OUT_FILE Output response to specified file
--in-file IN_FILE Input file
--format FORMAT Output or input format
--help show this help message and exit.
interface:
port RS232 interface to the unit to be controlled
--unit UNIT Unit model ID
--revision REVISION Unit firmware revision
actions available on unit::
--echo ECHO Set unit echo ON or OFF
--get-battery-voltage
Retrieve unit battery voltage value
--get-cfg Retrieve unit's configuration
--get-dsid Undocumented command
--get-ef Retrieve current EF reading
--get-emf Retrieve current EMF reading
--get-gyroscope Retrieve gyroscope values
--get-identity Retrieve unit identity: model, firmware revision and
serial number
--get-mode Retrieve current unit operating mode
--get-rf GET_RF Retrieves an RF measurement
--get-screen Retrieve unit's LCD controller memory data
--get-serial Retrieve unit serial number
--get-xyz Retrieve magnetic field on x, y and z axes
--key-hold KEY_HOLD Simulate a key hold
--key-press KEY_PRESS
Simulate a key press
--play PLAY Play a list of commands described in specified YAML
file
--power POWER Turn the unit on/off
--reboot Reboot the unit
--reset-factory Reset the unit to factory defaults
--reset-rf-peak Retrieve current RF reading
--rtc-get Retrieve unit date and time
--rtc-set-date-dd RTC_SET_DATE_DD
Set RTC date day
--rtc-set-date-mm RTC_SET_DATE_MM
Set RTC date month
--rtc-set-date-yy RTC_SET_DATE_YY
Set RTC date year
--rtc-set-time-hh RTC_SET_TIME_HH
Set RTC time hour
--rtc-set-time-mm RTC_SET_TIME_MM
Set RTC time minute
--rtc-set-time-ss RTC_SET_TIME_SS
Set RTC time second
--rtc-sync Synchronize real time clock with local computer
--speaker SPEAKER Set the speaker on/off
--spectrum-get-band-data
Retrieve current spectrum analyzer band gain values
--spectrum-reset Reset spectrum band data
--spectrum-scan-complete
Flagged True when the whole spectrum band has been
analyzed
--spectrum-set-band SPECTRUM_SET_BAND
Define spectrum analyzer band ID
--spi-erase Erase unit's data log
--spi-get Retrieve unit's data log
--wait WAIT Wait for the specified number of seconds to elapse
This software is private initiative, conducted independently of GQ Electronics LLC.