7ife / archer-t2u-plus-linux

TP-Link Archer T2U Plus / AC600 High Gain USB Wifi Adapter Review & Driver installation Guide for various platforms.

TP-Link Archer T2U Plus a.k.a AC600 High-Gain

TP-Link Archer T2U Plus a.k.a AC600 High Gain is a very affordable dual band wireless adapter compatible with kali linux and supports monitor mode , soft AP mode,packet injection etc. it supports both 2.4 GHz and 5GHz band and has a 5dBi Antenna for better signal reception.

Why should i buy this adapter ?

This adapter has a Realtek RTL8821AU Chipset at its heart. RTL8821AU has plenty of developer support in linux community and has driver for Kali linux , Parrot OS , Black Arch .etc Archer T2U Plus is on sale under 15 USD ~ 1000 INR , which is a very affordable price for Beginners in Pentesting.

Where to buy

👉 Amazon
👉 Flipkart

Driver for Debian Based Linux Distros (Ubuntu/Kali Linux)(x86_64)

1. Update the package information :

sudo apt update

2. Install dkms and git :

sudo apt install dkms git

3. Install Build Dependencies :

sudo apt install build-essential libelf-dev linux-headers-$(uname -r)

4. Download the Driver files using git :

git clone https://github.com/aircrack-ng/rtl8812au.git

5. Navigate to the Downloaded directory :

cd rtl88*

6. Install the Driver

sudo make dkms_install

7. Check the wireless interfaces by typing iwconfig.

👉 Change/Rename Network Interface

Driver for Raspberry Pi (Raspbian OS / Kali)(ARM)

1. Update the package information :

sudo apt update

2. Install dkms and git :

sudo apt install dkms git

3. Install Build Dependencies :

For Raspbian OS

sudo apt-get install raspberrypi-kernel-headers

For Kali for ARM

sudo apt-get install build-essential libelf-dev kalipi-kernel-headers

4. Download the Driver files using git :

git clone https://github.com/aircrack-ng/rtl8812au.git

5. Navigate to the Downloaded directory :

cd rtl88*

For Raspberry (RPI)

6. Then run this step to change platform in Makefile, For RPI 1/2/3/ & 0/Zero:

sed -i 's/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g' Makefile
sed -i 's/CONFIG_PLATFORM_ARM_RPI = n/CONFIG_PLATFORM_ARM_RPI = y/g' Makefile

But for RPI 3B+ & 4B you will need to run those below which builds the ARM64 arch driver:

sed -i 's/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g' Makefile
sed -i 's/CONFIG_PLATFORM_ARM64_RPI = n/CONFIG_PLATFORM_ARM64_RPI = y/g' Makefile

In addition, if you receive an error message about unrecognized command line option ‘-mgeneral-regs-only’ (i.e., Raspbian Buster), you will need to run the following commands, then retry building and installing:

export ARCH=arm
sed -i 's/^MAKE="/MAKE="ARCH=arm\ /' dkms.conf

7. Install the Driver

sudo make dkms_install

8. Check the wireless interfaces by typing iwconfig.

👉 Change/Rename Network Interface

References

DigitalOcean.com : Sed Stream Editor Basics