Web GUI cannot be used with the testbed
rriggio opened this issue · comments
Roberto Riggio commented
Problem: With the testbed you only can SSH into your nodes. So, using the Web GUI is impossible. This makes it a bit hard to set up the network slice and assign the WTPs. The way I did it was to set everything up on my local setup, and then clone that, including the database, to the testbed.
Reported by Zeljkovic Ensar
Roberto Riggio commented
Now there is a CLI that can be used to perform all the operations usually performed with the GUI. Check the following wiki page:
https://github.com/5g-empower/5g-empower.github.io/wiki/Command-Line-Interface