Remove custom lattice infill from STLs and missing design files

Question

Remove custom lattice infill from STLs and missing design files

BenGWeeks opened this issue 3 years ago · comments

Ben Weeks commented 3 years ago

Hi all,

When printing the STLs, it looks like there is a custom infill that causes issues with printing:

(You'll notice the curled edges, most likely due to overhanging I guess).

In the slicer we can see:

There is also some oddness in the layers:

I would suggest that it is built as a solid object, and you let the slicer deal with the infill. This would most likely significantly improve print times as well.

Would also be good if original design files are added to source control (do not seem to be correct files located in https://github.com/21isenough/LightningATM/tree/master/resources/3dmodels/LightningATM%20-%20Pocket%20Edition).

Great work though.

Ben

Ben Weeks · Answer 1 · Fri Jan 07 2022 04:04:53 GMT+0800 (China Standard Time)

(Happy to help if source files available)

Ingo · Answer 2 · Sat Jan 22 2022 08:15:29 GMT+0800 (China Standard Time)

Thank you for your suggestion for improvement.
I asked in the telegram channel if someone could upload the files or make them available. I can't see the other files in the directory right now. Is the case "Fiat Hell" already available?